Dumbassbiker.com/Harvey Danielson Cycle Supplies/Eastside H&D

YES! We ship world wide, add product to cart for your shipping cost options.

Your Online Motorcycle Parts Store

YOU MAY LAUGH AT OUR NAME BUT YOU”LL LOVE OUR PRICES

 2400 40th St SW

Mpls/Waverly, MN. 55390

 

Attention!

read this:

FOR QUESTIONS

E-MAIL us first for parts quotes and stock at ORIGSQUIG@AOL.COM OR PARTS@DUMBASSBIKER.COM 

We will respond with in 24 hours during working days, many times in less then 2 hours.

Do not waste my time and yours by calling with part numbers and questions. it takes time to look up parts and stocks, if you call we will tell you to e-mail us, Include your phone number so we can contact you when we have the information you need.

 

Attention: Phone hours 9am-5 pm monday to Friday, 11am-2 pm Sat. Central time only. 

 

Phone 612-296-7771

 

If you have a question about parts e-mail us or fax. Most questions can't be answered over phone in short order (we respond with in 2-24 hours, phones are busy most times, and it takes time to look up parts, prices, and availability. 

Fax 240-332-6641

 

 
1) Dumbassbiker.com Motorcycle Parts

Home Page
2) Air cleaners

Air cleaners, accessories, Breathers, filters, etc.
3) How to Books

Books, DVD's, Calendars, Repair & How to Manuals

4) - Brake Systems

Brakes, Calipers, Rotors, pads & related brake parts
5) Covers,

Chrome Covers, Rocker box, Cam, Transmission, Primary, dress up kits, etc.
6) Drive line kits

Dumbassbiker special Drive line kits complete, Engine, Transmission, Primary, Starter packages. Builders kits.
7) Electric Parts

Electric Parts, Starters, jack shafts, Batteries, Wiring harness, Headlights, genral lighting, Ignition Systems, etc.
8) Electronics, radios, amps, speakers

Electronics/ amps, speakers, radios, etc.
9) Engines

Engines and Engine related products, motor mounts, cases, motor components.
10) Exhaust systems,

Exhaust systems, drag pipes, Related Products
11) Fllters, Oil, Fluids,

Filters for Oil and fuel, Oil coolers, Oil Mounts, Motor & Trans oils, motorcycle care products. Bike wash, Fluids (oil,trans, brake)
12) Forward controls.

Forward controls, foot pegs, hiway bars, and related products.
13) FRAMES, frame related parts

Frame Shop, choppers, bobbers, pro street, oem, sportster, buell, etc., and frame related items
14-) Fuel Systems

Fuel Systems & managament, Petcocks, Carbs, Throttle body, F.I. systems, fuel control, Krank vents, Intake Manfoilds, fuel caps, fuel line,
15) Gauges,

Gauges & mounts, Speedometer, Rpm, oil, temp. etc
16) Handle bars

Handle bars and related products, Hand controls, Risers, Grips.
17) Hardware, nuts and bolts

Hardware, and fastners. Chrome, stainless, hardware kits.
18) Ignition systems, plugs, points, coils,etc

Ignitions, coils, plug wires, spark plugs, distributors, points, & Ignition Accessories.
19) License plate holders, frames,lights

License plate holders, mounting brackets, side mount, plate lighting, etc.
20) Mirrors, mirror stems,

Mirrors, stems and hardware
21) Lighting -head and taillights

Headlights, tail lights, lighting parts and accessories
22) New Items

New items, New released products, hot stuff,
23) Rear drive parts

Rear drive, Belts, Chains, sprockets, pulleys, and related products
24) Motorcycle Seats, Bitch Pads

seats,and other leather products
25)Sheet Metal

Sheet Metal, Fenders, Fuel and oil tanks, spoilers, fairings
26) Shocks, Front ends, Suspensions

Shocks, suspensions and front ends, Air shocks, Springers, etc.
27) Pimp My Garage

Shop Items- Tools, Maintenance items, Bike lifts, fuel storage, custom tools, shop supplies, cleaners.
28)Big Dog, Indian , Etc

BIG DOG AND OTHER HARLEY COPY CAT STYLE BIKES.
29) Sportster Seats

Sportster Seats, Seat pads, solo's, bitch pads
30) Sportster and Buell exhaust systems

 

 

Exhaust and brackets for sportsters
31) Sportster and Buell products,
32)T-Shirts,clothing.

T-Shirts, biker apparel, jackets, gloves, fun stuff. MENS, WOMENS, AND CHILDRENS, APPEARL.

33) Transmissions,

Transmissions, Primary drives, Clutches, auto clutches, Jockey shifters, trans and drive related parts,
34) V-Rod parts

V-ROD parts and accsssories
35 - Victory and other U.S.A. made motorcycles

New VICTORY PARTS AND MORE COMING SOON. keep watching
36) Wheels & Tires,

HARLEY, V-TWIN, CHOPPER, MAG WHEELS, SPOKED WHEELS, TIRES, REPAIR KITS, ETC
37) Wide tire kits for harley and customs

WIDE TIRE KITS AND ACCESSORIES
38) Metric Cruser/sport bikes

Yahama, Honda, Suzuki, KAWASAKI V-Star, Hayabusa, BMW, DUCATI, TRIUMPH and other v-twin crusiers. NEW WE ARE SLOWLY ADDING PARTS FOR SOME METRIC BIKES, sport bikes AND CRUSIERS.
39) Gift items, Unique Stuff

Special products that make great gifts for your Harley riding Buddies, stocking stuffers at Christmas, or birthday gifts.
40) Classic Harley Parts1915-1983

Classic Harley Davidson parts 1915-1983, pans, knuckleheads, flat heads, shovels, Indian.
41) Belt drives & primary drive systems

Belt drives, Clutches, Spacers, Enclosed Primary drives & parts,
42. - Touring and Bagger parts,

Bagger and Touring Parts for Harley's and customs. Bagger parts for softails/dyna/flh/. Custom touring bike parts, fenders, tour packs, radios, Sirius & XM add ons, speakers, shocks, intercom, replacement frames, wide tire kits for baggers.
exhaust/7SUPERTRAPP 10 - Exhaust systems, drag pipes, Related Products

Dumbassbiker.com home page

Payment Processing

DUMBASSIKER.COM ONLINE STORE IS OPEN 24/7/365,

OFFICE HOURS FOR PHONE QUESTIONS MON-FRI 9AM-5PM, SAT 10 AM-1PM, SUN OFF. CENTRAL TIME USA it is best to e-mail any question you have first as phones are very busy and it takes time to look up parts for prices.

* * * * PLEASE READ THE FOLLOWING: * * * *

What you see listed on our web site is only a small sample of what we can get for you. If you don't see what you want e-mail us at Parts@dumbassbiker.com we can find you most anything. You may also search online catalogs from CUSTOM CHROME http://www.customchrome.com, DRAG SPECIALTIES http://www.dragspecialties.com/, MC ADVANTAGES http://www.mcadvantages.com/, BAKER DRIVETRAIN http://www.bakerdrivetrain.com/, RIVERA-PRIMO http://www.riveraengineering.com/ AND THE MANY OTHER ONLINE MOTORCYCLE SITES. Do a Google search for your product, Then drop us an e-mail with your request, We will respond within one day(sometimes within hours) with a price quote.

Name:
Price: $
Quantity:

Dumbassbiker Variable

Price and Product form.


ENTER PRICE 

(As Quoted by E-MAIL or PHONE only)

 PRODUCT NAME or EBAY AUCTION NUMBER

or PRODUCT PART NUMBERS IF KNOWN.

I.E. CUSTOM CHROME P/N 33012 OR

EBAY AUCTION NUMBER 12094736

INCLUDE SHIPPING QUOTE AND PRICE TOGETHER (TOTAL)in the price box

 

Do not use this form unless we have told you to do so.

This is for e-mail and phone quotes only and not for items listed in our store elsewhere.

 
Model 1027 Thunderheadertm for Softails
1027
$598.00 On Sale! $540.00
Quantity:
select part number and options
1027

2000-2006 All model Softails. Increased horsepower & unmistakable Thunderheadertm sound.

and to cart for sale price and shipping costs

2000- 06
All model Softails.
Heat Shields 1082 (top rear), 1083 (top front), & 1090 (collector)
$589
1027B
$668
Heat Shield set of 3
 $186
$210

Allow 2-6 weeks on average shipping times
Colbra Speedster Shorts for 2008-2009 Rocker models
colbra6765
$599.95 On Sale! $539.95
Quantity:
select part number and options
6765
Speedster Shorts
These traditionally styled shotgun pipes also produce class-leading power gains. Includes oxygen sensor bungs.
Cobra's Speedster systems combine traditional styling and modern performance technology. These triple-chromed, shotgun-styled pipes feature full-length, 222-degree heat shields, chromed aluminum billet tips and are available in long, short and slashdown versions. They also deliver power gains over stock that are among the highest in the business. In part those gains come from the Cobra PowerPort, our proprietary crossover technology that helps to increase overall power from idle to redline. The end result is the Speedsters deliver the kind of power increase you normally experience with a 2-into-1 system, while retaining the clean classic lines of a 2-into-2 pipe. The system is equipped with oxygen sensor bungs so you can take advantage of your motorcycle's closed loop technology.
Quiet Core
9015Q
$34.95

 

Just as beauty is in the eye of the beholder, you could say that sound is in the ear of the same person. For those who prefer to hear their motorcycle's deep rumble at lower dB, we offer quiet cores that reduce nose levels by 3-5 dB, depending upon the motorcycle and pipe. Replaces original Cobra cores.

 
Colbra Dragsters for 2008-2009 Rocker
colbra6825
$519.00 On Sale! $489.00
Quantity:

6825
Dragsters
Easy installation and a limited Lifetime Warranty. That's a tough combination to beat.
Cobra Dragsters are the perfect update to traditional staggered drag pipes. Retaining the clean, pure drag-pipe appearance that has made them so popular over the years, the Dragsters incorporate full-length heat shields that do not turn blue. They are capped off with machined and chromed billet tips. Offered in the classic staggered configuration.
Cobra Speedster Swept Exhaust for Rocker 2008- 2009
colbra6235
$689.00 On Sale! $619.00
Quantity:
select model and accessories
colbra6235
Speedster Swept
Swept Speedsters feature full-length 2.5-inch heat shields finished off with slash cut ends. And they come with Cobra's limited Lifetime Warranty
The Swept Speedsters are an all-new design from Cobra. With a graceful radius that begins behind the rear cylinder and then continues to the rear axle area where the tips end, the pipes provide the correct proportional look to the bike. The removable baffles work to keep the sound levels within socially responsible levels. The ends of the pipes feature a radial slash design, almost a curling wave of metal.

But it's the PowerPort that makes this exhaust system more than a cosmetic or acoustic upgrade. The PowerPort connects the front and rear headpipes to promote superior exhaust scavenging. The result is improved torque and overall power (much like you would expect to achieve from a performance 2-into-1 system) from the time-honored 2-into-2 design.

Because of the swept design, the Speedsters require the removal of the right-side passenger foot peg. In most cases this will be a non-issues because the Rocker is styled to be a solo machine. But in case a Rocker rider wants or needs that foot peg, or Softail riders who need it, Cobra is offering an optional foot peg relocation bracket that curves up from under the pipes to locate the peg in the proper position.
 

Footpeg Relocation bracket

Footpeg Relocation bracket
For use with the Swept Speedster exhaust system. For the right side only.
606-6235
$29.95
Speedster Slashdown Exhaust for 2008-2009 Rockers
colbra6865
$629.95 On Sale! $669.00
Quantity:
select part number and options
rocker_6865
Speedster Slashdown
These traditionally styled shotgun pipes also produce class-leading power gains. Includes oxygen sensor bungs
Cobra's Speedster systems combine traditional styling and modern performance technology. These triple-chromed, shotgun-styled pipes feature full-length, 222-degree heat shields, chromed aluminum billet tips and are available in long, short and slashdown versions. They also deliver power gains over stock that are among the highest in the business. In part those gains come from the Cobra PowerPort, our proprietary crossover technology that helps to increase overall power from idle to redline. The end result is the Speedsters deliver the kind of power increase you normally experience with a 2-into-1 system, while retaining the clean classic lines of a 2-into-2 pipe. The system is equipped with oxygen sensor bungs so you can take advantage of your motorcycle's closed loop technology. The system is equipped with oxygen sensor bungs so you can take advantage of your motorcycle's closed loop technology.
RELATED PRODUCTS
 
 
Quiet Core
9015Q
$34.95
 

 

Just as beauty is in the eye of the beholder, you could say that sound is in the ear of the same person. For those who prefer to hear their motorcycle's deep rumble at lower dB, we offer quiet cores that reduce nose levels by 3-5 dB, depending upon the motorcycle and pipe. Replaces original Cobra cores.

 
ST#828-71400
$846.00 On Sale! $800.00
Quantity:

2:2 FAT SHOTS:H-D FXST/FLST 84-06, CHR

4" External tunable disc chrome 2:2 system.

These massive 2" diameter 2:2 head pipes are just what a rider ordered to get a lot of power out of a softail. Topped off with our high volume 4" disc tunable SuperTrapp mufflers, you can count on getting a crisp throttle response and increased performance throughout the entire power curve. Their unique shotgun styling expertly finished in show quality chrome will definitely set your bike apart from the crowd.

ACCESSORIES & REPLACEMENT PARTS

4” Disc 6-Pack 404-6506

4” Disc 12-Pack 404-6512

6-Pack with High-Temp Lube (holds up to 20 discs) 404-7206

6-Pack with High-Temp Lube (holds 15 to 34 discs) 404-7306

High-Temp Lube 3-pack 090-2622

Repack Kit 400-2217

4” 6-bolt Closed End Cap 406-3046

4” 6-bolt Open End Cap (Competition Use Only) 405-3046

Aluminum 6-bolt End Cap with Heatshield 402-3046

, Polished Aluminum End Cap, Star 402-1000

TrappCap, Polished Aluminum End Cap, Grate 402-1005

TrappCap, Polished Aluminum End Cap, Cone 402-1010

TrappCap, Polished Aluminum End Cap, Dotted Wheel 402-1015

TrappCap, Polished Aluminum End Cap, Slotted Wheel 402-1020

Replacement Stainless Steel Core 400-1140

T-bolt Clamp 094-2250

E-MAIL FOR OPTIONS PRICES, FOR MORE INFORMATION VIST WWW.SUPERTRAPP.COM
exhaust/SUPERTRAPFATSHOT330
SUPERTRAPP 2:2 FAT SHOTS:H-D FXST/FLST,330 WIDE,RSD
ST#828-71420
$917.00 On Sale! $879.00
Quantity:

FOR MORE INFORMATION OR TO SEE OTHER AVAIABLE SUPER TRAP PRODUST VISIT WWW.SUPERTRAPP.COM WE CAN ORDER WHAT EVER YOU NEED

These massive 2" diameter 2:2 head pipes are just what a rider ordered to get a lot of power out of a softail. Topped off with our high volume 4" disc tunable SuperTrapp mufflers, you can count on getting a crisp throttle response and increased performance throughout the entire power curve. Their unique shotgun styling expertly finished in show quality chrome will definitely set your bike apart from the crowd.

4" External tunable disc chrome 2:2 system.

THESE ARE FOR WIDE TIRE 330 APLICATIONS,

AVAIABLE ACCESSORIES CALL FOR PRICES

Accessories and Replacement Parts

4” Disc 6-Pack 404-6506

4” Disc 12-Pack 404-6512

Screw 6-Pack with High-Temp Lube (holds up to 20 discs) 404-7206

Screw 6-Pack with High-Temp Lube (holds 15 to 34 discs) 404-7306

High-Temp Lube 3-pack 090-2622

Repack Kit 400-2217

4” 6-bolt Closed End Cap 406-3046

4” 6-bolt Open End Cap (Competition Use Only) 405-3046

Aluminum 6-bolt End Cap with Heatshield 402-3046

TrappCap, Polished Aluminum End Cap, Star 402-1000

TrappCap, Polished Aluminum End Cap, Grate 402-1005

TrappCap, Polished Aluminum End Cap, Cone 402-1010

TrappCap, Polished Aluminum End Cap, Dotted Wheel 402-1015

TrappCap, Polished Aluminum End Cap, Slotted Wheel 402-1020

Replacement Stainless Steel Core 400-1140

T-bolt Clamp 094-2250

E-MAIL FOR PRICES ON ACCESSORIES
SUPERTRAPP CRACK PIPES
$682.00 On Sale! $650.00
Quantity:
SELECT MODEL

Designed by premier master bike builder Paul Yaffe and manufactured by SuperTrapp, these Crack Pipes are just what you need to transform your Softail from mild to wild. Added features include heavier wall tubing for increased durability and models are now available in black ceramic high temperature paint with chrom heatshields which really have a distinctive look.

Paul Yaffe's 2" straight through drag pipes with 3 decorative chrome heatshields and signature claw tips.

MODELS

Rd Lgnds CrackPipes,HD FXST '90-06, Blk #138-71452 $723 DAB $680

Rd Lgnds CrackPipes,HD FXST '90-06, Chr #138-71451 $682 DAB $650

CLICK ON PHOTO FOR LARGER VIEW
STPHANTOMPIRE
$917.00 On Sale! $880.00
Quantity:
SELECT MODEL

The Phantom Pipe. Yet another hot design from Master bike builder Paul Yaffe. Perfect for riders seeking to add custom style to their bike at a less-than-custom price. This curvy 2:1 drag pipe is based on Yaffes fire-breathing exhaust from his Biker Build-off Phantom Bike seen on Discovery Channel. Sorry, but the flame thrower feature on the Build-off bike is not included in this production version. The new system is available in several finishes and comes with 4-piece stylized chrome heatshields.

MODELS

PHANTOM PIPE,HD RSD CUSTOM, Silver #138-71446 $917

PHANTOM PIPE,HD RSD CUSTOM, Black #138-71447 $917

PHANTOM PIPE,HD FXST/FLST '86-06, Silver #138-71448 $917

PHANTOM PIPE,HD FXST/FLST '86-06, Black #138-71449 $917

VISIT WWW.SUPERTRAPP.COM FOR MORE INFORMATION AND OTHER PIPES. CLICK ON PHOTO FOR ANOTHER VIEW
VRODTHUNDERHEADER
V-ROD THUNDERHEADER
VRODTHUNDERHDER
$568.00 On Sale! $529.00
Quantity:
SELECT MODEL AND HEAT SHIELDS OPTIONS

No Other Exhaust Sounds or Performs Like a Thunderheader 2-into-1 System!

Patented anti-reversion design produces maximum horsepower without sacrificing low-end torque. Its why Thunderheaders are the number one exhaust for Harley-Davidson motorcycles! Complete with all hardware needed to replace your stock exhaust system. Heat shields (sold separately) are furnished with heavy duty stainless steel mounting clamps. Black ceramic coating is available by special order at slightly higher prices. Ask your sales rep for details. Made in the USA.

Note: Double style heat shields cover the side by side pipes up to the collector.

1029 CHROME RETAIL $568 OUR PRICE $529.00

1029B BLACK RETAIL $668.00 OUR PRICE $600

for heat shields use pull down menu for prices
exhaust/treandkills
MARTIN BROTHERS SOFTAIL TRENDKILLS RIGHT SIDE DRIVE
P/N #MBE-012
$699.00 On Sale! $600.00
Quantity:
SELECT OPTIONS
THIS IS A BRAND NEW SEALED IN THE BOX SET OF MARTIN BROTHERS SOFTAIL TRENDKILLS RIGHT SIDE DRIVE EXHAUST PIPES. P/N #MBE-012 ORIGINAL JOE MARTIN DESIGN.THESE PIPES WERE DESIGNED AND NAMED AFTER THE TRENDKILL CUSTOM CHOPPER FRAME. THESE SHORTIES HAVE AWESOME CURVES AND KICK ASS SOUND. STEPPED FROM 1.75" TO 2" TO 2.25". ......MODELS.... MBEO12RS Trendkills RSD, chrome, stepped 1.75" to 2"........ MBEO12RSCC Trendkills RSD, chrome w/ internal ceramic coating.......... MBEO12RSCH Trendkills RSD, 2-Tone black/chrome. stepped....... MBEO12RSB Trendkills RSD, all black external ceramic coating TRANMISSION MOUNTED, FITS SOFTAILS AND MOST CUSTOM APPLICATIONS WITH EVOLUTION OR TWIN CAM 88" AND ALL AFTER MARKET MOTORS. AVAILABLE IN SHOW CHROME AND COMES WITH MOUNTING BRACKET AND HARDWARE THESE REQUIRE FLANGES AND GASKETS NOT INCLUDED. THESE PIPES ARE RIGHT SIDE DRIVE ONLY. WE ORDER THESE AT TIME OF YOUR PURCHASE, SHIPPING TAKES 1-4 WEEKS SOMETIMES LONGER
gettoblasters
Ghetto Blasters Exhaust Pipes RSD for EVO and TC
MBEO13RS/RSCC
$699.00 On Sale! $650.00
Quantity:
SELECT MODEL

The newest RSD spawn from Joe Martin's imagination are these 2-1 Ghetto Blasters with a sharp Daisycutter-style end.

Product Numbers & Description:

MBE013R Ghetto Blasters RSD, chrome, stepped 1.75" to 3".

MB013RB Black Ceramic

MB013RCH

MBE013RCC Ghetto Blasters RSD, chrome w/ internal ceramic coating

Please state the make, model and engine the pipes are being ordered for.
 

 
exhaust/slickstas
Martin Bros.® Skritliftas Exhaust Pipe RSD
MBEO14RS/RSCC
$599.00 On Sale! $525.00
Quantity:
SELECT MODEL
These new RSD pipes have a large, slotted and sharp open end. Two words: STAND BACK! Product Numbers & Description: MBEO14RS Skirtliftas RSD, chrome, stepped 1.75" to 2". MBEO14RSCC Skirtliftas RSD, chrome w/ internal ceramic coating
exhaust/CURB_FEELERS
Martin Bros.® Curb Feelers Exhaust Pipes
CURB FEELERS
$799.00 On Sale! $720.00
Quantity:
SELECT MODEL #
Martin Bros.® Curb Feelers Exhaust Pipes
$799.00 $720.00 On Sale!
CURB FEELERS

Martin Bros.® Curb Feelers Exhaust Pipes

This RSD style has bell-like billet aluminum tips for back pressure and race-inspired looks. Tranny-mounted and stepped from 1.75" to 2".
Part Number Our Price
MBE015RS Chrome. Stepped 1.75" to 2". $720
MBE015RSCC Chrome w. internal ceramic coating. $790
MBE015RSCH 2-Tone black/chrome. $790                             
MBE015RSB All black external ceramic coating. $720

MBE015HS Heat Shields, chrome.

MBEO15 CHROME RSD

MBE015CC CHROME w internal ceramic

MBE015CH Two tone black /chrome

MBE015B all black

MBE015HS RSD HEAT SHIELDS

$225

$720

$740

$800

$720

$225
exhaust/blistas_EXHAUST
Martin Bros.® Blistas Exhaust Pipes
MC BLISTAS
$799.00 On Sale! $720.00
Quantity:
SELECT MODEL
Martin Bros.® Blistas Exhaust Pipes
The absolute newest Martin Bros. addition to the MC Advantages collection. This RSD style has bell-like billet aluminum tips for back pressure and race-inspired looks. Tranny-mounted and stepped from 1.75" to 2".
 
Part Number Our Price
MCA-MBEO16RS Chrome. Stepped 1.75" to 2" $720.                                 
MCA-MBEO16RSCC Chrome w. internal ceramic coating. $820
MCA-MBEO16RSCH 2-Tone black/chrome. $790
MCA-MBEO16RSB Black with external ceramic coating. $820
MCA-MBEO16HS Heat Shields, Chrome. $225
exhaust/topfuel
Stainless Creations Top Fuel Exhaust
SCETFR/L/LTC
$700.00 On Sale! $640.00
Quantity:
SELECT MODEL #
Stainless Creations Exhausts are handcrafted in the USA from .065" wall stainless steel and then hand-polished to a brilliant shine. Every set includes mounting brackets and a free sample of polish to keep the pipes looking new. All of the exhaust systems are designed for RSD applications with 0" transmission offset. Please order additional spacer kit for 1/2" or 3/4" offset. They can also be purchased for 330 tire applications and Left Side Drive applications by special order. Please allow four week delivery on special order. Performance baffles are available by special order for all of the 2 into 2 styles. Handcrafted in the USA. Product Numbers & Description: SCETFR RSD, Evo® SCETFL LSD, Evo® SCETFLTC LSD, TC
exhaust/Pandemonium
Stainless Creations Pandemonium
scepr/scepl
$1,125.00 On Sale! $1,000.00
Quantity:
select model number

Stainless Creations Exhausts are handcrafted in the USA from .065" wall stainless steel and then hand-polished to a brilliant shine. Every set includes mounting brackets and a free sample of polish to keep the pipes looking new. All of the exhaust systems are designed for RSD applications with 0" transmission offset. Please order additional spacer kit for 1/2" or 3/4" offset. They can also be purchased for 330 tire applications and Left Side Drive applications by special order. Please allow four week delivery on special order. Performance baffles are available by special order for all of the 2 into 2 styles. Handcrafted in the USA.
exhaust/Disorder
Stainless Creations Disorder Exhaust
SCEDLR/TC
$1,125.00 On Sale! $1,025.00
Quantity:
SELECT MODEL
Stainless Creations Exhausts are handcrafted in the USA from .065" wall stainless steel and then hand-polished to a brilliant shine. Every set includes mounting brackets and a free sample of polish to keep the pipes looking new. All of the exhaust systems are designed for RSD applications with 0" transmission offset. Please order additional spacer kit for 1/2" or 3/4" offset. They can also be purchased for 330 tire applications and Left Side Drive applications by special order. Please allow four week delivery on special order. Performance baffles are available by special order for all of the 2 into 2 styles. Handcrafted in the USA. Product Numbers & Description: SCEDLR RSD/LSD For Evo® ...... SCEDLTC LSD, TC
exhaust/Mayhem
Stainless Creations Mayhem Exhaust
SCEMR/L
$1,125.00 On Sale! $1,015.00
Quantity:
SELECT MODEL
Stainless Creations Exhausts are handcrafted in the USA from .065" wall stainless steel and then hand-polished to a brilliant shine. Every set includes mounting brackets and a free sample of polish to keep the pipes looking new. All of the exhaust systems are designed for RSD applications with 0" transmission offset. Please order additional spacer kit for 1/2" or 3/4" offset. They can also be purchased for 330 tire applications and Left Side Drive applications by special order. Please allow four week delivery on special order. Performance baffles are available by special order for all of the 2 into 2 styles. Handcrafted in the USA. Product Numbers & Description: SCEMR RSD For Evo® SCEML LSD For Evo®
exhaust/ChaosIII
Stainless Chaos III Exhaust
SCEC3R/L/LTC
$775.00 On Sale! $715.00
Quantity:

Stainless Creations Exhausts are handcrafted in the USA from .065" wall stainless steel and then hand-polished to a brilliant shine. Every set includes mounting brackets and a free sample of polish to keep the pipes looking new. All of the exhaust systems are designed for RSD applications with 0" transmission offset. Please order additional spacer kit for 1/2" or 3/4" offset. They can also be purchased for 330 tire applications and Left Side Drive applications by special order. Please allow four week delivery on special order. Performance baffles are available by special order for all of the 2 into 2 styles. Handcrafted in the USA. Product Numbers & Description: SCEC3R RSD For Evo® SCEC3L LSD For Evo® SCEC3LTC LSD, TC
exhaust/c4l
Stainless Creations C4L Exhaust
SCEC4LR/L
$700.00 On Sale! $630.00
Quantity:
SELECT MODEL
Stainless Creations Exhausts are handcrafted in the USA from .065" wall stainless steel and then hand-polished to a brilliant shine. Every set includes mounting brackets and a free sample of polish to keep the pipes looking new. All of the exhaust systems are designed for RSD applications with 0" transmission offset. Please order additional spacer kit for 1/2" or 3/4" offset. They can also be purchased for 330 tire applications and Left Side Drive applications by special order. Please allow four week delivery on special order. Performance baffles are available by special order for all of the 2 into 2 styles. Handcrafted in the USA. Product Numbers & Description: SCEC4LR RSD For Evo® SCEC4LL LSD For Evo®
exhaust/chaoII
Stainless Creations Chaos II Exhaust
SCEC2R/L
$775.00 On Sale! $705.00
Quantity:
SELECT MODEL
Stainless Creations Exhausts are handcrafted in the USA from .065" wall stainless steel and then hand-polished to a brilliant shine. Every set includes mounting brackets and a free sample of polish to keep the pipes looking new. All of the exhaust systems are designed for RSD applications with 0" transmission offset. Please order additional spacer kit for 1/2" or 3/4" offset. They can also be purchased for 330 tire applications and Left Side Drive applications by special order. Please allow four week delivery on special order. Performance baffles are available by special order for all of the 2 into 2 styles. Handcrafted in the USA Product Numbers & Description: SCEC2R RSD For Evo® SCEC2L LSD For Evo
SOFTTAIGBIGRADIUS
VANCE AND HINES BIG RADIUS
VT-30-1500
$649.95 On Sale! $580.00
Quantity:
select model#
Never before has such style delivered this level of performance. Big Radius set the standard for a custom look but with the quality and perfection you would expect from Vance & Hines. Featuring beautifully curved 2 1/2” full-coverage heat shields, artistically scalloped end tips, and blue proof show quality chrome. The extra horsepower and torque produced gives the signature hot-rod sound an even bigger bite. This system is the ultimate in style and performance. Baffles, mounting hardware and easy-to-understand instructions are included for a hassle-free, perfect fit every time. 1800-0013 - Fits 86-06 Softail®, FXSTS, FLSTF, FXSTN, FXSTB, FXST, FXSTC and Deuce ($649.95)-------1800-0083 for 1991-05 dyna models--------1800-0239 for 06 dyna models
big shot
$674.00 On Sale! $600.00
Quantity:
select model number
Vance & hines Big Shots. click on photo for more information and fitments
Vance & Hines Straight shots
$284.00 On Sale! $250.00
Quantity:
select model number

STRAIGHTSHOTS HS SLIP-ONS

give your Softail superior performance and style without breaking the bank. the new straightshots hs slip-ons offer the look and sound you’ve grown to love from vance & hines at an unbelievable value. show quality chrome, 2 1/2” diameter fullcoverage muffler heat shields house the new straightshots hs slip-ons and make them blue-proof for long lasting style. race inspired performance and traditional hot rod sound set this system apart

SOFTAIL

(07-08) FLSTF, FXSTD PN: 1801-0259 $284.00

(05-08) FLSTN Note: ALSO FITS 08 CROSS BONES PN: 1801-0260 $284

(00-06) FLSTC, FXSTC Note: FIT 00-06 FXST/FLSTC ONLY PN: 1801-0110 $269.00

(00-06) FLSTF, FXSTD PN: 1801-0119 $284

(08) FXCW/C Note: ALSO FIT FLSTC/FXCW MODELS PN: 1801-0258 $284.00

(07-08) FLSTC, FXSTB/C Note: ALSO FIT FLSTC/FXCW MODELS PN: 1801-0258 $284

DYNA(91-08) fxd/fxdwg n/f 2008 fxdf PN: 1801-0111 $269.95

Sportster

(04-08) XL PN: 1801-0088 $259
Turbo Kit BY Grandeur Cycle
Turbo Kit BY Grandeur Cycle
TURBOKIT
$3,195.00 On Sale! $2,995.00
Quantity:
select model

Grandeur Turbo Kit is carefully designed to bolt straight onto a stock H-D with no other engine mods needed. It takes approx. 9 hours to install and no special tools are required. It comes with every part needed to do the installation except oil. This is one of the cleanest looking turbos on the market, as well as being one of the most simple to install. It retains complete stock-like drivability and is very well mannered under boosted conditions. The power delivery is much like that of a stock bike, only a lot more of it ! The system is built with only the best materials, such as a coated header pipe and chrome exhaust with chrome heat shield. A stock Harley produces about 60hp at the rear wheel. With this system, a stock TC88 will make about 110hp @ 7-8psi of boost. This kit is for carburator models, it comes with new carburator and manifold,

New fuel injection model, comes with everything needed to convert your Harley FI model to turbo power, retail $4995 our price $4595
VTWINEXHAUST
Custom Exhaust For Softail Evolution And Twin Cam
VT 30-0320
$325.00 On Sale! $265.00
Quantity:

V-twin Manufacturing Custom Exhaust For Softail Evolution And Twin Cam Radii's 2" curved pirate style exhaust pipe set fits 1986-up softail Evolution and Twin Cam in softail or rigid frame.
VTEXHAUST2
Chrome Stack Style Exhaust
VT 30-0543
$279.00 On Sale! $225.00
Quantity:

V-Twin Manufacturing Chrome Stack Style Exhaust Chrome 2-1/4" diameter stack style exhaust for Evo and Twin Cam Softails and Rigid frames with forward controls. # VT 30-0543
exhaust/DD2007BAGGER
2007 FLH/FLT BAGGER Fat Cat Performance Exhaust Pipe BY D & D
502-32B
$725.00 On Sale! $650.00
Quantity:

2007 FLH/FLT Fat Cat Performance Exhaust Pipe

Performance – D&D Performance pipe increases horsepower and low end torque. Will need to tune pipe to your engine specification.

Sound - We spent significant time working on the dynamometer to keep the rumble strong.

D&D P/N 502-32B The 2007 FLH/FLT pipe utilizes all standard hardware. Factory stock oxygen sensors fit without modifications
exhaust/SAMRIPSAWSST
SAMSON RIPSAWS 1986-2008 SOFTAILS
S-874
$599.00 On Sale! $499.00
Quantity:
RIPSAWS BIG GUN 3 S-874 Fits 1986 to Present Softail Models Price = $499.95 DAB= $450
exhaust/SAMSONS871
SAMSON EXHAUST SLASHER FOR 1986-2008 SOFTAILS
SAMSON S-871
$599.95 On Sale! $499.00
Quantity:

SLASHER BIG GUNS 3 S-871 Fits 1986 to Present Softail Models Price = $499.95 DAB=$450.00
exhaust/SAMPSONS859
SAMSON EXHAUST STREET SWEEPERS SOFTAIL 1986-2008
SAMSON S-859
$599.95 On Sale! $499.00
Quantity:

STREET SWEEPERS BIG GUNS 3 S-859 Fits 1986 to Present Softail Models Price = $499.95 DAB=$450.00
exhaust/SAMSONS801
SAMSON SOFTAIL 1986-2008 CANNON EXHAUST
SAMSONS801
$599.95 On Sale! $499.00
Quantity:

CANNON BIG GUNS 3 S-801 Fits 1986 to Present Softail Models Price = $499.95 DAB=$450.00
ACCESSORIESUNLIMITED_RSDEXHAUST
Right side drive razor exhaust with heat shields
ACCESORRSDEXHAUST
$595.00 On Sale! $450.00
Quantity:

Right side drive razor exhaust with heat shields, FITS EVO 1984-1999 AND TWIN CAM 1999-TO PRESENT WITHOUT OXYGEN SENSORS.
Kerker_K_Series
Kerker K Series Slip-Ons - Brushed Aluminum
132-71134
$420.00 On Sale! $380.00
Quantity:

Kerker K Series Slip-Ons - Brushed Aluminum These slip-ons are 13 pounds lighter than stock and are the perfect addition to setting your Night Rod or Street Rod free. Kerker K Series Slip-Ons have a deep signature exhaust tone. The high flowing 2" diameter baffle produces optimum performance. The expertly finished, brushed aluminum impact extruded canister conceals the totally rebuildable core and packing.

Part #132-71134 MSRP $420.0

K-SERIES S/O, HD NT/ST ROD '2006-08 MODELS
FatShots_Slip_OnsVROD
KERKER FatShots Slip-Ons - Black or Chrome for V-RODS
827-71134/828-71134
$509.00 On Sale! $452.00
Quantity:
SELECT PART NUMBER
These stylish slip-ons will add a unique look and sound to your bike. 4" diameter tunable mufflers that you can count on to get crisp throttle response and increased performance throughout the entire power curve. Their unique shotgun styling expertly finished chrome will definitely set your bike apart from the crowd. Available as black or chrome slip-ons.

FatShots Slip-Ons - Black Part #827-71134 MSRP $509.00

FatShots Slip-Ons - Chrome Part #828-71134 MSRP $509.00

FAT SHOTS,H-D Night Rod or Street Rod,'2006-2008, CHROME
XR883SPORTSTER
SUPERTRAPP SPORTSTER 2 INTO 2 XR STYLE SYSTEM
815-71202ST
$795.00 On Sale! $725.00
Quantity:

Sportster 2 into 2 XR Style System

This tunable SuperTrapp 2 into 2 system is the offspring of our flat track racing systems. It allows a rider to bolt on a 10% horsepower increase to their stock 883 model and over 20% horsepower gains on a stock 1200. The Sportster 2 into 2 XR Style System features brushed stainless steel head pipes and megaphones. The megaphone design allows the exhaust gas to expand, which increases power while the discs allow the rider to control how much flow they want.

It has 02 EXHAUST sensor ports installed to utilize stock sensors on fuel injected models and also includes plugs for the ports when used on carbureted models.

The Sportster 2 into 2 XR Style System is equipped with a completely rebuildable core and packing to save riders time and money. Optional open end caps are available for closed course competition.

SuperTrapp's tunable disc technology allows riders to add 4" discs to increase horsepower, exhaust tone and flow, or riders can remove 4" discs to reduce sound and increase low-end torque. The 2 into 2 system comes with twenty-four 4" discs allowing the rider to utilize twelve discs in each muffler. Additional discs are sold separately.

For ultimate durability, the exhaust system bracket is mounted to the transmission allowing it to move with the rubber-mounted motor.

These are also available as a Universal to fit unique applications. For more information on these and other SuperTrapp products, visit www.SuperTrapp.com.

Part #815-71202 MSRP $795.00

Sportster 2 into 2 XR System now available for Harley-Davidson XLH883-1200 2004-2008 models.

sportxpipeblackst
SUPERTRAPP X Pipes for Sportsters black model
138-71202/138-71208
$859.00 On Sale! $775.00
Quantity:
SELECT PART #

X Pipes for Sportsters

Another exciting design by Paul Yaffe, the X Pipes are a classic over-and-under shotgun design with the Yaffe touch. Complete with ventilated spot heat shields and chrome billet end tips, this system has become a builder's inspiration. Check out the magazine and TV project bikes and you are sure to see X Pipes up close! Sporting heavier wall tubing and color options, models are now available in chrome, classic black or brushed silver, all with distinctive looking chrome heatshields.

Sportster X Pipes. X-PIPE,3 SHLD,'04-06 HD SPRSTR,BLK - Black Part #138-71208 MSRP $859.00

X-PIPE, '07-08 HD SPORTSTER, BLACK PART #138-71208 MSRP $859.00
FORCE38LONG
VRSC Streetfighter 38's Black Long BY FORCE
Part #7082-500BK
$460.00
Quantity:

Night Rod Custom riders...Heres you E-ticket. The Streetfighter 38's in Bad Black adds horsepower and gives your VRSC Night Rod the sound and respect motorcycles of this World Caliber so righteously deserve. Easy to install, wisely retains the stock headpipes for efficient and necessary scavenging. Approximately 14' in total length. Race Tuner Kit or well respected Dynojet Power Commander recommended to recalibrate air fuel ratio coupled with high flow air K&N filter for a butt kickin increase in acceleration. Fits VRSC Vrod, Streetrod, Nightrod and Screamin Eagle versions.
FORCE_38_LONG
VRSC Streetfighter 38's Race Pipes - Longpipes
7082-500
$429.00
Quantity:

We did what any hardcore Hot Rodder would do!! More than just a good lookin' exhaust set up for your VRSC Series Harley Davdison motorcycle. Free flowing exhaust ends adds horsepower and gives your VRSC the sound and respect motorcycles of this World Caliber so righteously deserve. Easy to install, wisely retains the stock headpipes for efficient and necessary scavenging. Race Tuner Kit or equal from your Harley dealer recommended to recalibrate air fuel ratio coupled with high flow air filter for a butt kickin increase in acceleration. Fits VRSC Vrod, Streetrod, Nightrod and Screamin Eagle versions.

Part#: 7082-500

Fits: VSCR Series
FORCE_7080-500
VRSC Streetfighter 38's Race Pipes - Staggered BY FORCE
7080-500
$429.00
Quantity:

Same as long exhaust pipes but staggered length. We did what any hardcore Hot Rodder would do!! More than just a good lookin' exhaust set up for your VRSC Series Harley Davdison motorcycle. Free flowing exhaust ends add horsepower and gives your VRSC the sound and respect motorcycles of this World Caliber so righteously deserve. Easy to install, wisely retains the stock headpipes for efficient and necessary scavenging. Race Tuner Kit or equal from your Harley dealer recommended to recalibrate air fuel ratio coupled with high flow air filter for a butt kickin increase in acceleration. Fits VRSC Vrod, Streetrod, Nightrod and Screamin Eagle versions.

Part#: 7080-500

Fits: VSCR Series
PEACEMAKERS
National Cycle Peacemaker Exhaust
PEACEMAKERS
$675.99 On Sale! $600.00
Quantity:
SELECT PART NUMBER

National Cycle
Peacemaker Exhaust

Imagine being able to start up your Harley® for an early morning ride without angering
the neighbors. Imagine enjoying a deep, powerful exhaust note without cringing
whenever you pass a police officer or school zone. The new Peacemakers® Exhausts
make those dreams a reality!
video link
click here to watch the video >


 

603446 Fits FLH/FLT models from 1995 to 2007 $680

603447 Fits Softail Deuce/FXSTDI - Fat Boy FLSTFI models from 2000 to 2006 $600

603448 Fits FLST/FLSTC/FXSTB/FXSTS/FXST models from 2000 to 2006 $600

603449 Fits FLSTN Softail Deluxe models from 2005 to 2006 $600

603450 Fits all FXD Dyna series models from 1995 to 2005 $600

603451 Fits all Dyna series models from 2006 to 2007 $600

603452 Fits all Sportster models from 2004 to 2007 $600

603474 Turn down exhaust tips for FLH/FLT model exhausts 1995 to 2007. Sold in Pairs $119.99
vtexhaust
FLT_FLHT Muffler sets
$228.00 On Sale! $200.00
Quantity:
select model number

FLT-FLHT Muffler Sets are available in turnout or fishtail design. Mufflers fit the existing clamps and hangers and are 3” in diameter, except VT No. 30-0228 which is 2 1/2” O.D. 30- 0227 and30-0228 include body clamps. Prices start at $200 and up

MODEL# Years Size / Type Brand

30-0214 1985-94 31” Fishtail MCM $228 sale $200.00

30-0250 1995-96 31” Fishtail Cycle Shack $420.92 sale $380.00

30-0213 1985-94 31” Turnout Paughco $383.97 sale $350.00

special order item only, most ship within one week but allow 2-5 weeks shipping times
30-0387
CURVADO PIPE SET 1986-up XL sporster models
30-0387
$297.16 On Sale! $260.00
Quantity:
select part numbers
CURVADO PIPE SET 1986-up XL Curvado pipes are 2" O.D. and have removable oxygen sensor plugs allowing them to fit on 2007-up models. These pipes provide plenty of flow and a great sound. The unique shape will compliment any bike. Curvados will fit 1986-up XL models with the correct mounting bracket. Purchase bracket separately. Mounting bracket for 1986-03 use VT#31-0988. For 2004-up use VT#31-0989 add $36 for your choice of brackets

Exhaust pipes tend to come in a large package for shipping, overseas customers should use usps options
EXHAUSTS/BLACK_LAKE_PIPE
GRANDEUR CYCLE BLACK LAKE PIPE EXHAUST
GRANDEUR 650043B
$549.00
Quantity:
SELECT MODEL AND OPTIONS
2 into 1 Header Style Pipe With 11" & 5" LONG Extention.Firs EVO and Twin Cam to present Right or Left Side Drive. SHOWN WITH CHROME HEAT SHIELDS. HEAT SHIELS EXTRA
FORCE38SHORTIES
VRSC Streetfighter 38's Black Shorties
Part #7081-500BK
$429.95
Quantity:

Night Rod Custom riders...Heres you E-ticket. The Streetfighter 38's in Bad Black adds horsepower and gives your VRSC Night Rod the sound and respect motorcycles of this World Caliber so righteously deserve. Easy to install, wisely retains the stock headpipes for efficient and necessary scavenging. Approximately 14" in total length fpr the longer pipe and about 9" for the shorter. Race Tuner Kit or well respected Dynojet Power Commander recommended to recalibrate air fuel ratio coupled with high flow air K&N filter for a butt kickin increase in acceleration. Fits VRSC Vrod, Streetrod, Nightrod and Screamin Eagle versions. Ck out our online catolog and Supersize it!

Part #7081-500BK
SPORT_FORCE_STREETFIGHTER
Streetfighter Sportster Race Pipes BY FORCE
7075-01/7078-01
$742.95
Quantity:
SELECT PART NUMBER
Streetfighters Unite!! Again...Its here.. by popular demand! All the attributes that make our now famous Streetfighter Race Pipe for the Buells the most powerful exhaust system on the planet is now available for EVO Sportsters. Step header, merge collector with a reverse cone megaphone. Covered in JET HOT metallic ceramic coating inside and out. The same coating used on nitro top fuelers. This system is made to win races and dyno bragging rights. Awesome HP and torque, killer sound, cool lookin. Available in your choice of Shimerin Silver or Bad Black. It is best to use Force.

Part#: 7075-01 SILVER

PART # 7078-01 BLACK

Fits: 86-05 Sportster EVO XL models (Does not fit 88R's) THIS IS A LARGE BOX SHIPS UPS ONLY
Trask_sportster_turbo
TRASK EFI SPORTSTER TURBO
TRASK EFI SPORTSTER TURBO
$4,995.00 On Sale! $4,600.00
Quantity:
SELECT COLOR
If you think your Sporty is a gas now, you ain’t seen nothin’! Strap on one of these new Turbo kits just unleashed by TRASK PERFORMANCE and you’re in for a mind altering experience. TRASK, a world leader in the design and production of reliable, street worthy H-D turbo systems has developed a unique turbo package designed specifically for 2007 and 2008 EFI equipped Sportsters. Sold as a complete bolt-on kit, it can be installed by any competent HD mechanic. Once installed the numbers are nothing short of astonishing. Try 113.3 HP at 6200 RPM with 110 Ft Lbs torque from an otherwise stock 2007, 1200R! Now those are some impressive numbers and they come on in a fashion that provides exceptionally smooth pulling power for both street and open road use. Each kit comes with an highly modified Garrett GT Series turbocharger, billet plenum with built-in velocity stack, billet breathers, ceramic or chrome pipes, hi-flow injectors, and even a high performance clutch spring! No matter if you’re looking or a real street menace or more open road pulling power this new kit has you covered and then some. Retail $ 4995
95107
EXHAUST PIPE CLAMP & RETAINING RING FOR EVOLUTION AND TWIN CAM 88
95107
$21.05 On Sale! $19.00
Quantity:

Kit includes two clamps and two gasket retaining rings. Fits Evolution, all years, and Twin Cam 88 1999/Later.
94002
EXHAUST GASKETS FOR SHOVELHEAD
94002
$11.10
Quantity:

flange type gasket to keep exhaust pipe aligned flat when bolt is tightened. Works better than original round gasket. These gaskets are constructed of compressed rubber gasket material which is a mixture of nitrite butadiene rubber and organic fillers which will withstand temperatures of 480 degrees and 360 psi pressure. Copper Crush Ring with full metal jacket both sides. Metal has rust preventive coating. Sold in packages of 10.
90167
POWER HOUSE DRAG PIPE SET FOR SHOVELHEAD 1970/1984
90167/90175
$132.60 On Sale! $120.00
Quantity:
select model number and accessories

40" long Slash Cut Drag Pipe Exhaust Sets

Feature over the transmission rear pipes that will clear the big FL battery with metal relay cover removed Fits kick or electric start models in swingarm frames They also feature hidden channel mounts without T bolts for a clean appearance

Parts Necessary to Complete Installation:

Use 95118 T Bolts, 95026 hanger bracket, exhaust port gaskets and exhaust flange bolts

POWERHOUSE by Kraft Tech

90167 Chrome Plated 1 3/4" $120

90175 Chrome Plated 2" $130

95118 CHROME PLATED T BOLTS FOR CHANNEL MOUNT EXHAUST $15

95026 MOUNTING BRACKETS FOR SHOVELHEAD CUSTOM EXHAUST $25

Fits FL and FX Shovelhead 4 speed 1970/1984

add to cart for shipping costs, large package may not ship to some countries usless you use UPS due to sizes.
95026
MOUNTING BRACKETS FOR SHOVELHEAD CUSTOM EXHAUST
95026
$30.05
Quantity:

Shovelhead 1970/Later. Fits Cycle Shack Drag Pipe Sets 90060 and 90159 and Dual Exhaust System 92085 and POWER HOUSE 90167 and 90175. OEM FX Models 1971/1984 & FXWG Models 1980/1982. Fits Cycle Shack Drag Pipe Sets 90004, 90009, and 90157 and Dual Exhaust Systems 91113, 91130, 92011, 92013, 92047 and 92048.

95118
CHROME PLATED T BOLTS FOR CHANNEL MOUNT EXHAUST
95118
$15.85
Quantity:

Studs measure 5/16-18 x 1" long

T plates measure 1 1/2" long x 5/8" wide

Includes two T bolts and two nuts with integrated lock washers

90171
CLASSIC DRAG PIPE EXHAUST SETS FOR IRONHEAD SPORTSTER
90171
$132.00
Quantity:

Continued classic lines and premium performance from the POWER HOUSE exhaust line. These 40" Long Classic Drag Pipe Exhaust sets have a brilliant chrome finish and offer hidden channel mounting. Fit Ironhead Sportster, 1957/1985 (except 1979).

1 3/4" O.D. Slash Cut.

Parts Necessary to Complete Installation:

1980/1985 require 95002 brake pedal stop. All years use 95028 bracket, 95102 T Bolts and exhaust port clamps.

Note: Drag pipes have no mufflers and are designed for use in closed course or show competition only. They will exceed any noise standard anywhere and as such are illegal for use on highway.

add to cart for shipping costs
95002
BRAKE PEDAL STOP FOR SPORTSTER
95002
$3.75
Quantity:

Replaces combination brake pedal stop and mounting bracket on the factory front pipe on Sportster 1980/1985 when using custom exhaust pipes. Chrome plated
95028
MOUNTING BRACKETS FOR SPORTSTER CUSTOM EXHAUST
95028
$27.75
Quantity:

Black fits Cycle Shack Drag Pipe Sets 90006, 90013, 90158, Dual Exhaust Systems 92015, 92016, and 92055, and most OEM set ups
FreedomTrueDuals
True Duals Headers for Touring Models by Freedom Performance
689767
$449.99 On Sale! $409.00
Quantity:

True Duals Headers for Touring Models by Freedom Performance

These true duals complement the look of your touring bike, running two independent head pipes, one for the right and one for the left side, this system both sounds and looks awesome. These head pipes will work with both OEM and most aftermarket slip on mufflers, giving you a wider variety of choices to customize your exhaust to fit your style. Header kits include front and rear pipes, all necessary mounting hardware and full coverage heat shields.

689767 Fits all Touring models 1995-2008* . . . . . . $449.99 our price $409.00

Note: O2 sensor bungs installed, O2 Sensor bung plugs and Stainless Steel mounting hardware is included.

we ship worldwide. Add to cart for shipping calculations
1020
$589.00 On Sale! $530.00
Quantity:
select model and options
Thunderheader for Shovelhead non rubber mount only. click on photo for more information.
Colbra Speedster Shorts for 2008-2009 Rocker models
colbra6765
$599.95 On Sale! $539.95
Quantity:
select part number and options
6765
Speedster Shorts
These traditionally styled shotgun pipes also produce class-leading power gains. Includes oxygen sensor bungs.
Cobra's Speedster systems combine traditional styling and modern performance technology. These triple-chromed, shotgun-styled pipes feature full-length, 222-degree heat shields, chromed aluminum billet tips and are available in long, short and slashdown versions. They also deliver power gains over stock that are among the highest in the business. In part those gains come from the Cobra PowerPort, our proprietary crossover technology that helps to increase overall power from idle to redline. The end result is the Speedsters deliver the kind of power increase you normally experience with a 2-into-1 system, while retaining the clean classic lines of a 2-into-2 pipe. The system is equipped with oxygen sensor bungs so you can take advantage of your motorcycle's closed loop technology.
Quiet Core
9015Q
$34.95

 

Just as beauty is in the eye of the beholder, you could say that sound is in the ear of the same person. For those who prefer to hear their motorcycle's deep rumble at lower dB, we offer quiet cores that reduce nose levels by 3-5 dB, depending upon the motorcycle and pipe. Replaces original Cobra cores.

 
X-Pipes
x-pipes-pyo
$839.00 On Sale! $800.00
Quantity:
select style
pyo-x-pipes

X-Pipes
The latest offering from Paul Yaffe Originals and the greatest name in exhaust "SuperTrapp" is the completely unique "X-Pipe".  These 2" diameter shotgun pipes feature drilled billet tips and drilled heat shields.  They are available in chrome or black Jet Hot with chrome heat shields and tips

X Pipes - Softail - Chrome - FLST / FXST '86-06          $839.00
X Pipes - Softail - Blk Ceramic - FLST / FXST '86-06   $859.00
X Pipes - Dyna Glide - Blk Ceramic - FXD '91-05         $859.00
X Pipes - Dyna Glide - Chrome - FXD '91-05                $839.00
X Pipes - Sportster - Chrome - XL '04-06                     $839.00
X Pipes - Sportster - Blk Ceramic - XL '04-06              $859.00
Paul Yaffe FLH Phantom Pipes
PP_bag
$1,295.95 On Sale! $1,200.00
Quantity:

Yaffe_PP_BAG

FLH Phantom Pipes This is the loud and stylish, black ceramic pipe your bagger has been begging for. Decorative billet end tip engraved with domino dots gives it a look all it’s own. Includes 4-piece stylized chrome heatshields to keep you worry-free of discoloring. Based off the original Phantom pipe, but with a bagger flare. You know you want it.

 Part# PP-BAG-B / FLH/FLT 1986-2009 Phantom Pipes
Kerker & Paul Yaffe Supertrapp SE pipe tips and Reinhart adapter kits
KerkerYaffe tips
$29.40
Quantity:
select part number tips are sold each
Keker_Yaffe_piptips

Prices start at $29.40 and up

(1) END CAP KERKER TURNOUT/TURNDOWN, CHROME108-8022$57.80 each
(2) END CAP KERKER, FISHTAIL, CHROME108-8023$73.50 each
(5) (END CAP KERKER, TAPERED, CHROME108-7257$29.40 each
(7) END CAP, BILLET, FLUTED, CHR. 3.5"108-8029$71.40 each
(8) (END CAP, BILLET, GROOVED, CHR. 3.5"108-8033$71.40 each
(4) END CAP, BILLET, TAPER/SLASH, CHR. 3.5"108-8031$71.40 each
(3) (END CAP, SLASH CUT, CHR. 3.5"108-8027$57.80 each
(10) END CAP, YAFFE AFTERBURNER, BLACK108-8035$157.00 each
(9) END CAP, YAFFE AFTERBURNER, CHROME108-8037$157.00 each
(11) END CAP, YAFFE BIG POPPA, CHROMED108-8040$93.50 each
(12) END CAP, YAFFE CLAW, CHROMED108-8042$93.50 each
(6) END CAP,KERKER,"JAVA JUGS",CHROME108-8025$57.80 each
(below Left) ENDCAP, YAFFE HOLY MOLY, BLACK ANODIZED108-8044$124.50 each
(below)ENDCAP, YAFFE HOLY MOLY, CHROME108-8046$124.50 Each
(13) Reinhart Adapter Kit p/n se-ta Set of twoSE-TA$59.95 set

 

(13)Reinhart® Adapter Kit
Due to the overwelming response to Paul’s new Afterburner tips we
now offer an adapter kit that allows Paul’s designer tips to be installed
on Reinhart® touring exhaust systems. So, no worries, if you’re
already running Reinharts you can still have the Yaffe style

Tips are sold each is you have duals you need to select 2 items, Reinhart adapter kit is sold as a set of two.
Cobra Exhaust touring 1995-2010 Billet Tip Slip-Ons
6202
$474.95 On Sale! $450.00
Quantity:

6202.jpg
Billet Tip Slip-Ons
A four-inch diameter chromed billet tip caps off this four-inch muffler body

Instructions
 
Our award winning slip-ons for Harley Baggers are beloved by editors and real-world riders alike. That's because Cobra Slip-ons provide increased horsepower and torque with a deeper, more aggressive exhaust note. The 4-inch muffler body has proprietary technology to prevent bluing. With the louvers located further back in the muffler, super-heated gasses get a chance to cool before exiting the silencer core making Cobra Dresser mufflers virtually blue proof.

these are shipped in large package, so overseas shipping may be high cost by ups
Cobra Exhaust 1995-2009 Dresser Uppercut Slip-Ons
6201uc
$419.95 On Sale! $400.00
Quantity:

6201uc
Uppercut Slip-Ons
The upper cut design follows the lines of the stock bags.

Our award winning slip-ons for Harley Baggers are beloved by editors and real-world riders alike. That's because Cobra Slip-ons provide increased horsepower and torque with a deeper, more aggressive exhaust note. The 4-inch muffler body has proprietary technology to prevent bluing. With the louvers located further back in the muffler, super-heated gasses get a chance to cool before exiting the silencer core making Cobra Dresser mufflers virtually blue proof

 

 
Cobra Exhaust 1995-2009 Slashdown Slip-Ons
6201sd
$419.95 On Sale! $389.00
Quantity:

6201sd
Slashdown Slip-Ons
The classic slash down look. The design cuts back under the bag, directing sound waves downward.
Our award winning slip-ons for Harley Baggers are beloved by editors and real-world riders alike. That's because Cobra Slip-ons provide increased horsepower and torque with a deeper, more aggressive exhaust note. The 4-inch muffler body has proprietary technology to prevent bluing. With the louvers located further back in the muffler, super-heated gasses get a chance to cool before exiting the silencer core making Cobra Dresser mufflers virtually blue proof.
 
 

 

Cobra 1995-2009 touring exhaust Slashcut Slip-Ons
6201SC
$419.95
Quantity:

6201sc
Slashcut Slip-Ons
The pure slash-cut look on a four-inch muffler body gives a nice deep rumble without sounding too rebellious.
Our award winning slip-ons for Harley Baggers are beloved by editors and real-world riders alike. That's because Cobra Slip-ons provide increased horsepower and torque with a deeper, more aggressive exhaust note. The 4-inch muffler body has proprietary technology to prevent bluing. With the louvers located further back in the muffler, super-heated gasses get a chance to cool before exiting the silencer core making Cobra Dresser mufflers virtually blue proof.
 

 

 
 
True Dual Headpipes 2007-2008 Touring Cobra Exhaust
6251
$399.95 On Sale! $369.00
Quantity:

6251
True Dual Headpipes
Full-length, 2.5-inch heatshields cover 1.75-inch headpipes so stock and most aftermarket muffler bodies will fit perfectly.

The larger heatshields will also deflect more heat making it noticeably cooler for the rider and passenger.Our True Dual headpipes come with Cobra's limited Lifetime Warranty in addition to a host of other unique features. One-piece full-length, 2.5-inch diameter heat shields cover the pipes from the exhaust ports to the chromed, muffler bodies. The heat shields are a larger diameter than most other offerings on the market and the single-piece shields (especially on the rear pipe) are singular in their design and effectiveness.

The added benefit is that the larger heatshields will deflect more engine heat away from the rider, making it noticeably cooler for the rider and passenger

The pipes were also designed to deliver optimal torque and power while increasing the stock bike 's rideability right in the sweet spot of the torque curve. The system consists of headpipes and heat shields and all of the mounting hardware needed to complete the installation of the made-in-the-U.S.A. pipes.

The headpipe's 1.75-inch diameter ensures the stock mufflers and most aftermarket mufflers will fit. The system is equipped with oxygen sensor bungs so you can take advantage of your motorcycle's closed loop technology
  
Touring exhaust 2007-2008 Corbra Exhaust
6411
$489.95 On Sale! $450.00
Quantity:

6411
Power Pro 2-into-1
Increased horsepower and torque are matched with the PowerPro's elegant design.Cobra has created what may be the best 2-into-1 pipe ever built. Its beauty comes from an updated traditional design, and it has the kind of modern features no other 2-into-1 pipe has. It shines with triple-chromed, full-length header heat shields, and has a unique and stunning collector heat shield so there are no visible welds in this collector area. The megaphone uses exclusive technology inside it to eliminate the chances of the muffler ever turning blue. On top of that, the PowerPro 2-into-1 produces class-leading horsepower from the moment you install it and roll on the throttle. The system is equipped with oxygen sensor bungs so you can take advantage of your motorcycle's closed loop technology.

 

 

 
Cobra Exhaust for PowerPro HP 2-into-1 2007-2008 Harley toruring models
6431
$589.95 On Sale! $529.00
Quantity:

6431
PowerPro HP 2-into-1
Power Pro 2-into-1 exhaust system for Dressers increases power and torque. The 4-inch muffler body produces a deep rumble.
This classic 2-into-1 exhaust system is at the top of the class. Real world performance gains matched by the perfect deep throaty rumble you expect from the Harley-Davidson V-Twin power plant. And it looks as good as it sounds with its 222-degree heat shields and our unique collector heat shield that covers the collector area. The 4-inch muffler body is capped off with a chromed beveled billet tip. We construct the muffler body in such as way that it will not discolor. In fact, the entire system is guaranteed not to turn blue for the life of the product so with a bit of care it will still look like new years later.

 

 
Cobra Speedster Xtra Longs exhaust 2007-2008 touring models
6961
$629.95 On Sale! $589.00
Quantity:
select part number and baffel option
6961
Speedster Xtra Longs
These traditionally styled shotgun pipes also produce class-leading power gains. Includes oxygen sensor bungs.

Note: Because of the size of the box, UPS adds a $6.00 handling charge that will not show up in our estimated shipping charges when you check out.
 
Cobra's Speedster systems combine traditional styling and modern performance technology. These triple-chromed, shotgun-styled pipes feature full-length, 222-degree heat shields, chromed aluminum billet tips and are available in long, short and slashdown versions. They also deliver power gains over stock that are among the highest in the business. In part those gains come from the Cobra PowerPort, our proprietary crossover technology that helps to increase overall power from idle to redline. The end result is the Speedsters deliver the kind of power increase you normally experience with a 2-into-1 system, while retaining the clean classic lines of a 2-into-2 pipe. The system is equipped with oxygen sensor bungs so you can take advantage of your motorcycle's closed loop technology.

Instructions

Quiet Core Baffles

Just as beauty is in the eye of the beholder, you could say that sound is in the ear of the same person. For those who prefer to hear their motorcycle's deep rumble at lower dB, we offer quiet cores that reduce nose levels by 3-5 dB, depending upon the motorcycle and pipe. Replaces original Cobra cores.
9017Q $34.95

 
1995 - 2010 Police Interceptor Slip-on Mufflers by D&D
408-14B
$450.00 On Sale! $405.00
Quantity:

408-14b

The Police Interceptor muffler is designed with a special noise reducing baffle that does not rob horsepower. Each muffler is made from heavy duty .065 wall durable 304 stainless steel that is buffed to a high-luster.

If the muffler should get scratched, stained or dirty a simple hand polish will bring it back to its original glossy state.

1995~2010 - Harley FLH/FLT - 408-14B - Police Interceptor Mufflers

 
Trik Ride Bagger/Touring Exhaust
tr
$300.00 On Sale! $250.00
Quantity:
select model
trikRideExhaust 3 style of new bagger exhaust by Trik Ride, include baffles. Does not have co2 bungs you will have to drill and install if you need bungs

Dumbassbiker.com home page
Gift Certificates
Send to a Friend!

Delivery Policy:

Please be advised most parts are special ordered at time of your purchase. In general most items take 1-2 weeks shipping times in USA(does not include special order items). Please allow proper time for shipping and handling of product. Some times items are back ordered, this is out of our control. If it will take over four (4) weeks for us to receive from our suppliers we will contact you for options (i.e. refund or wait for delivery). Normal delivery time is 1-2 weeks on most items. Special order items may take longer (1-8 Weeks) sometimes longer. Frames may take up to 3 weeks or more, Please do not pressure us to hurry, we do our best, but if you are building a bike and need it tomorrow, don't order it today. Plan on proper order times in your build. Many times we can rush ship or drop ship, but some suppliers don't do that. MSO's will be sent a soon as we receive them, plan to wait 1-8 weeks or more for mso, we can't make them come faster then they are sent to us. Just because you have a bike show in a week does not mean we can ship parts faster, as stated before order your parts ahead of time to allow proper delivery times. Overnight shipping gets very costly.

Refund/Exchange Policy We offer a 30 Money Back or exchange Guarantee on almost every product we offer. (Most items are exchange only). Refunds do not include special order items. Items will be exchanged if received damaged for the same part only. Please call customer service at 612-296-7771, in advance to obtain an RMA number (Return Merchandise Authorization) within 30 days of purchase date. Return merchandise with RMA number to: DUMBASSBIKER.COM 1598 E. SHORE DRIVE ST.PAUL, MN 55106 NOTE: Refunds sent with no RMA number, or mailed to the call center will be returned to sender, unless you have talked to us by phone. We are not at fault if you order the wrong part, we will work with you to fix the problem but many parts are special ordered from suppliers and thus non refundable or non-returnable. Please know what you want before you order. Items must be returned in the same condition as new for refund/exchange. If you install the part and then remove it, it is no longer new, if the packaging is opened or damaged it also is no longer new. There is a 30% restocking fee on all special order parts that our suppliers will accept for returns. There is no restock fees if item is one we normally stock and returned in new condition.

Order Cancellation Policyfor Dumbassbiker.com Please submit any cancellation via email to PARTS@DUMBASSBIKER.COM , or call on our business phone at 612-296-7771. Email cancellations must contain the following: First name, last name, order number, and email address. This information must be identical to the information originally submitted on your order. Please provide contact information so that we may contact you if we have questions in regards to canceling your order. Every effort will be made to accommodate the cancellation of your order, providing your order has not been charged and/or shipped out (excludes special order items). In the event that a cancellation was submitted (via email or phone), and your order was shipped out after, we will gladly refund the complete balance charged including shipping. However, if the cancellation was documented as received after the order was shipped, we will refund the merchandise total less shipping And 20% restocking fee (special order items 30%. Special order parts are not included, Special order item's, will incur a 30% cancellation fee, most item's are ordered at time of your purchase (thus special order items), once our order is placed with our suppliers, any cancellation is subject to a 20% restocking fee. All orders must be canceled within 2 days of order placement. If not yet ordered from supplier a full refund will be issued. If already ordered and shipped from our suppliers the restocking fee will be charged

Warranty Policy on all Motorcycle parts DUMBASSBIKER sells. Shipping Costs Customer assumes all costs in shipping to us, and we assume the cost in shipping back to the customer. All replacement/repaired products are shipped UPS Ground unless a rush is requested. The cost of such a shipping upgrade is to be paid by the customer prior to shipment. Warranty Procedure We suggest you contact our parts support team first by posting a question to e-mail parts@dumbassbiker.com to determine whether the item is indeed defective before shipping. Then make an online return merchandise authorization (RMA) request. See Return Policy for more details. No phone call or email is necessary! 30-Day Warranty All products (unless specifically stated otherwise), carry an implied, industry-standard 90-Day warranty against defects due to manufacturing or failure. Warranty does not include any use of the product that does not fall into the designed use of the product as intended by the manufacturer. Nor does it cover misuse or abuse. Does not include electronic or electric items or parts. 60 day Warranty All parts (except refurbished items) come with a warranty against manufacturer defect or failure for a period of 60 days from the date of purchase. This warranty covers replacement or repair of the product, which is determined by availability, or vendor, and the time of purchase. Replacement is often used within 30 days after purchase with the same product or like product when direct replacement is unavailable. Repair is often necessary for items purchased more than 30 days prior. Does not cover misuse or abuse or mis- installation . does not include electric parts or electronic devices. Manufacturer Warranty Manufacturers sometimes offer additional warranty for the following products: (…engines, transmissions primaries, wheels, tires, controls, etc). Customers should contact the manufacturer after warranty expires. Includes electrical components i.e. batteries, starters. Manufacturer warranty overrides dealer warranty in all cases.

A word about Dumbasbiker.com. We are parts dealers, we are not trained mechanics or bike builders, while we work on our own bikes and friends bikes, we don't claim to know everything about every product on the market. We have access to over 1,000,000 parts, Please understand you as the builder, installer, or mechanic, should do some research on your product purchase to assure you get what you need ( a good resource for all to have is the Harley service manual or how to books, most information carries over to aftermarket parts as they are all biased on Harley stock parts, fluid levels and specs). Goggle search is an excellent resource to find manufactures contact information and tech support phone numbers. We list everything we know about products in our listings, these are as spec 'd by parts manufacture. Our policy is to save you money on your purchase, and make life simple by buying online . If we have to take your order over the phone because you can't or don't want to do it on line there is a $10 customer service fee added to purchase price(this is only applied to phone purchases) It cost money to staff phone order lines, again less staff saves you money. We have a very secure web site for your safety, we do not save or keep credit card information on file, nor do we even see it when purchased on our web site. Again the best way to contact us is by e-mail it is almost impossible to quote prices on the phone in a short time has we have many suppliers for our parts, our goal is to get you the best price on a quoted part, that takes time and research. We will respond to e-mail ASAP. We can also send you order form by e-mail or fax. When you fill out the order form if you don't want to send us your credit card on the order form we will call you back for that number. Our phones are very busy all the time, so e-mail is better way to contact us first. While we do stock some items, do to the vast number of parts on the market place we can't stock them all. Most items ship in 2-7 days, although many special order items may take up to 10 weeks (i.e. frames, engines, etc) remember suppliers stocks change by the day and even by the second, as well time of year, may deplete suppliers stocks as well (spring is the worst) please order your parts well ahead to be assured of timely delivery and to meet your dead lines. Prices are as listed on the web site, we don't barter, we feel we offer fair prices for our parts. Warranties are provides by manufacturers. We will work to solve a problem of one arises.

What is a special order item? One we don't stock normally, if your local shop does not stock it we most likely don't either. Do to the large amount of part for motorcycles it is hard to stock everything, our suppliers are 1-3 day shipping to us on most items. We send on to you as soon as we receive an item.

We will do everything in our power to work with you on cancellations and returns, so there will be no charge backs to you. We sell at discounts to save you money, be sure to order correctly. If we charged retail prices we would have more room to relax our policy, but do to deep discounts there is not much overhead to eat mistakes you make with an order. Please e-mail us with questions or contact the manufacture for questions on parts and fitments. The more you know about your bike the easier it is for us to help you. Remember a custom is a one of a kind motorcycle, keep that in mind when asking questions that we can't answer.

Dumbassbiker.com is not responsible or liable for misuse or installation of any product we sell. You the customer, are responsible for safe use and installation of any product you purchase and install. Dumbassbiker.com makes no claims as to fitment and safety of the parts it sells, the manufacture is responsible for all fitment claims, and the safety of their products. We suggest a qualified mechanic install all custom parts.

We are an internet store, we perfer orders be place on the internet, by fax or e-mail, Phones orders have a $15 service charge added. Our goal is to save you money, the internet store takes the place of phone sales persons and can handle many orders at one time. Shipping is done Asap. Be aware that most items are special order only and we can't express ship to you until we receive the item from supplier. Add you item to cart to veiw shipping costs. We ship world wide.

DAB's Return Policy

Dumbassbiker.com does our absolute best to describe our products as accurately as possible, if you are not sure about the description of the item, or the fitment, PLEASE e-mail for assistance. We will not accept returns for perception errors or the appearance of the bike after an item is installed. If you have questions about the appearance or function of a motorcycle with a part installed, please contact us by e-mail, WE ARE HERE TO HELP YOU!!

All returns are subject to a 20-30% RESTOCKING FEE! No exceptions! All returns must be approved by DAB management and must have an RMA (Return Merchandise Authorization) number. Any returns without RMA # will be refused and returned to the customer.

All orders for custom (made to order) parts, special order parts, including exhaust and specialty parts that have long delivery times 2-10 weeks or more, ARE FINAL AND CANNOT BE CANCELED. If there are any questions regarding the delivery times of custom parts; please contact a DAB Representative by e-mail for delivery times before you order. parts@dumbassbiker.com

Any part that has a manufacturer’s defect will be returned to the manufacturer for replacement. The manufacturer has sole discretion in defect issues; we will do everything possible to expedite these return issues.

Any return issues must be brought to the attention of DAB within 72 hours of receiving the item.

All refunds will be made to the original purchaser and funds will be returned only in the method they were paid minus applicable fees/shipping charges.

We list everything we know about a part, If you have other questions, contact manufacture or e-mail us and we will attempt to find an answer, allow 2-3 days for responce.

With over 1,000,000 parts on the market it is hard to know everthing about every part, If the item states it fits 2000-2006, Please do not ask us if it fits a 1996 model, Fitments are listed from manufacture.

Prices are subject to change daily, while we try to keep current on all prices be aware they may go up or down and will have to be adjusted if that occurs.