Dumbassbiker.com/Harvey Danielson Cycle Supplies/Eastside H&D

YES! We ship world wide, add product to cart for your shipping cost options.

Your Online Motorcycle Parts Store

YOU MAY LAUGH AT OUR NAME BUT YOU”LL LOVE OUR PRICES

 2400 40th St SW

Mpls/Waverly, MN. 55390

 

Attention!

read this:

FOR QUESTIONS

E-MAIL us first for parts quotes and stock at ORIGSQUIG@AOL.COM OR PARTS@DUMBASSBIKER.COM 

We will respond with in 24 hours during working days, many times in less then 2 hours.

Do not waste my time and yours by calling with part numbers and questions. it takes time to look up parts and stocks, if you call we will tell you to e-mail us, Include your phone number so we can contact you when we have the information you need.

 

Attention: Phone hours 9am-5 pm monday to Friday, 11am-2 pm Sat. Central time only

 

Phone 612-296-7771

 

If you have a question about parts e-mail us or fax. Most questions can't be answered over phone in short order (we respond with in 2-24 hours, phones are busy most times, and it takes time to look up parts, prices, and availability. 

Fax 240-332-6641

 

 

BRAKE/23_0496 04 - Brakes, Calipers, Rotors, & related brake parts

Dumbassbiker.com home page

<BRAKES, CALIPERS, ROTORS, AND BRAKE RELATED PRODUCTS.

<For Motorcycle Brake Bleeding Tips see bottom of page.

* * * * PLEASE READ THE FOLLOWING: * * * *

What you see listed on our web site is only a small sample of what we can get for you. If you don't see what you want e-mail us at Parts@dumbassbiker.com we can find you most anything.

DUMBASSIKER.COM ONLINE STORE IS OPEN 24/7/365,

OFFICE HOURS FOR PHONE QUESTIONS MON-FRI 9AM-5PM, SAT 10 AM-1PM, SUN OFF. CENTRAL TIME USA it is best to e-mail any question you have first as phones are very busy and it takes time to look up parts for prices.

PHONE HOURS ARE 9 AM-5 PM MONDAY-FRIDAY 10 AM -1 PM SAT. CENTRAL STANDARD TIME USA

WATCH FOR OUR STAR RATINGS TO HELP PICK PRODUCTS

DAB STAR RATINGS

5* OR ***** BEST

4* OR **** ABOVE AVERAGE

3* OR *** AVERAGE

2* OR ** BELOW AVERAGE

1* OR * WORST

WE RATE QUALITY AND VALUE ON MANY PRODUCTS

Name:
Price: $
Quantity:

Dumbassbiker Variable

Price and Product form.


ENTER PRICE 

(As Quoted by E-MAIL or PHONE only)

 PRODUCT NAME or EBAY AUCTION NUMBER

or PRODUCT PART NUMBERS IF KNOWN.

I.E. CUSTOM CHROME P/N 33012 OR

EBAY AUCTION NUMBER 12094736

INCLUDE SHIPPING QUOTE AND PRICE TOGETHER (TOTAL)in the price box

 

Do not use this form unless we have told you to do so.

This is for e-mail and phone quotes only and not for items listed in our store elsewhere.

 

6PISTONJ-BRAKE
$425.00 On Sale! $380.00
Quantity:
PICK FINISH, RIGHT OR LEFT, RADIAL OR SMOOTH, AND YEAR NEEDED
  • Our Price
  • POLISH $380
  • CHROME $410
  • BLACK ANODIZE $410
INCLUDES ALL HARDWARE MADE IN USA LIFETIME WARRANTY SOLID BILLET ALUMINUM VISIT http://www.jbrake.com/CALIPERS.htm TO VEIW OPTIONS J-Six Piston Caliper The J-Six is Jaybrake's highest performing caliper. Designed using progress bore sizing with the smallest bore in the lead-in position. This differential bore progressive sizing is critical for heat distribution and pad wear. This also gives optimum lever feel and brake response. Jaybrake's J-Six are designed to direct mount onto Harley front forks (except Springers) without having to change the brake lines. They are designed to fit either pre-2000 or 2000 and up. They are available with radial lines or smooth face. Brackets are requred for rear brake mounting. MSRP: Polish $425.95, Chrome $459.95, Black Anodize $459.95
23-0551
Chrome Plated Rear Caliper Assembly FOR HARLEY DAVIDSON BY V-TWIN
23-0551
$228.00 On Sale! $200.00
Quantity:
SELECT MODEL
Chrome Plated Rear Caliper Assembly FOR HARLEY DAVIDSON BY V-TWIN New four piston design, includes all internal components. Fits 2000 and later Softail models. [Repl. OEM # 44414-00] Chrome caliper assy
23-0553
V-TWIN Chrome Plated Rear Caliper Assembly SPORTSTER
VT 230553
$257.00 On Sale! $253.00
Quantity:

...... V-TWIN FOR HARLEY SPORTSTER MODELS Chrome Plated Rear Caliper Assembly Fits 2000 -2003 Sportster models. Four piston design. Includes all internal components. [Repl. OEM # 40925-00] Part# VT 230553 Caliper for Sportster $257.90
BRAKE/90-562
Midwest Chrome single front left caliper kit 1984-1999
90-562R-90-561L
$165.00 On Sale! $140.00
Quantity:
SELECT SIDE
Midwest Motorcycle Supply's Chrome single front (left) OR (RIGHT) caliper kit. Fits all single disc models 1984 thru 1999. REPLACES OEM 44046-84C OR 44046-84C. BIG TWIN AND SPORTSTER. Chrome plated caliper assemblies include mounting hardware and brake pads. Replaces late style calipers.
BRAKE/23_0792
86-99 Custom Left Chrome Rear Brake Caliper Bracket
VT 23-0792
$189.00 On Sale! $140.00
Quantity:

V-Twin Manufacturing Custom Left Side Chrome Billet Rear Brake Caliper Bracket Fits 1986-1999 Softail style and custom frames with 3/4" or 1" axels. # VT 23-0792
BRAKE/23_0496
Chrome 4-piston Custom Brake Caliper
VT 23-0496
$230.00 On Sale! $200.00
Quantity:

V-Twin Manufacturing Chrome 4-piston Brake Caliper Fits many brake brackets for P.M., Hawg Halters, Dura, Chrome Horse, etc. # VT 23-0496
BRAKE/51-0512
Weld On Tab For Anchor Of Rear Brake Caliper Mount
VT 51-0512
$22.95 On Sale! $18.00
Quantity:

V-Twin Manufacturing Weld On Tab For Anchor Of Rear Brake Caliper Mount # VT 51-0512
BRAKE/brakster1
PULLEY ROTOR BRAKE SYSTEM BY DNA
DNA-M-PR
$1,149.95 On Sale! $830.00
Quantity:
SELECT MODEL

PULLEY ROTOR BRAKE SYSTEM BY DNA

Suggested retail: $1149.95 SHOW CHROME PLATED, 4 PISTON BRAKE, FITS SOFTAIL AND RIGID MODEL 1984-90 AND MOST CUSTOM BIKES. 3/4" OR 1" AXLE MOUNTED, PULLEY INCLUDED.

Sizes
  • 1-1/8" Belt x 65 Tooth Pulley M-PR-1008
  • 1-1/2" Belt x 70 Tooth Pulley M-PR-1010
  • 1-1/2" Belt x 65 Tooth Pulley, # M-PR-1012
  • 1-1/8" Belt x 70 Tooth Pulley, M-PR-1014
EDARTSPROCKETBRAKE
Edart Sprocket-Brake Caliper Kit
VT 22-0373
$525.00 On Sale! $480.00
Quantity:

Edart Sprocket-Brake Caliper Kit Set includes 2 piston chrome billet brake caliper and bracket with polished 50-tooth rotor/sprocket combination. For 1" or 3/4" rear axles. Fits custom Harley Big Twins and Sporters. # VT 22-0373
BRAKE/JKAYBRAKEBRACKET
JAY BRAKE J-SIX & J-FOUR CALIPER BRACKETS
JBRAKECALIPERBRACKET
$114.00
Quantity:
SELECT PART #

J-Series Caliper Brackets
Provides mount for rear brake application. Comes with hardware & spacers if needed. See part number guide for fitment

REAR JAY BRAKE J-SIX & J-FOUR CALIPER BRACKETS ALL HARDWARE INCLUDED. POLISHED, CHROME, OR BLACK ANODIZED MODEL #; ADD 1 FOR POLISHED, 2 FOR CHROME, 3 FOR BLACK BEHIND PART NUMBER

  • (A) 300-421 RIGHT SIDE 3/4 AXLE 87-99 FXR
  • (B) 300-422 RIGHT SIDE 3/4 AXLE 87-99 SOFTAIL
  • (C) 300-423 RIGHT 3/4 AXLE 87-99 DYNA GLIDE
  • (D) 300-425 RIGHT 3/4 AXLE UNIVERSAL CUSTOM
  • (E) 300-426 RIGHT 3/4 AXLE 2000-UP SOFTAIL
  • (F) 300-427 RIGHT 3/4 AXLE JULY 2000-UP DYNA GLIDE
BRAKE/vtwin_brake1
2000-up chrome or black front caliper kits for Harley Davidson
vtwin harley brakes
$279.43 On Sale! $250.00
Quantity:
select model number

2000-up Front Caliper are 4 piston type including all internal
components. 23-0554 features smooth face.

 

 

 


VT No. OEM    Side  Finish     retail    dab price
23-0529 44046-00  Left      Black        $279.43     $250
23-0554 As Above  Left     Chrome     $297.00     $270
23-0569 44046-00  Left     Chrome      $277.00     $270
23-0530 44025-00  Right   Black         $279.43     $250
23-0580 44025-00  Right   Chrome      $297.00     $270
23-0581           Set R&L    Chrome     $377.30     $340

BRAKE/2000caliperkit
2000-up Chrome front caliper and rotor kit
VT caliper kit
$285.57 On Sale! $250.00
Quantity:
select model #
2000-up Chrome Front Caliper and Rotor Kit
 fits 2000-up models. Kit includes a complete chrome replica 4-piston caliper
assembly with pads, polished stainless steel drilled rotor and
chrome mounting bolts.

VT No. Model
23-0561 FXST
23-0562 FXD
BRAKE/RUSSELPP
RUSSEL 420 STAINLESS PRO POLISH DISC BRAKE ROTORS
RUSSEL PP
$196.20 On Sale! $176.00
Quantity:
SELECT PART #

PRO POLISH STAINLESS STEEL BRAKE ROTORS

Russell logo

Features

  • Highly rust-resistant 420 stainless steel
  • Features the E.F.S.™ process that produces a mirror-like finish
  • Disc flatness held to one lightband (.0000116”) and finished to within one micro inch or less for zero runout
  • PART NO. DIA. HUB DIA. XL FL FX
    R47000PP 11-1/2" 2" 1984-99 Front 1984-99 Front 1984-99 Front
    R47001PP 11-1/2" 2" 1979-91 Rear 1986-91 FLST Rear 1981-91 Rear
    R47002PP 11-1/2" 2" 1974-77 Front - 1974-77 Front
    R47003PP 10" 2" 1978-83 Front - 1978-83 Front
    R47004PP 10" 2" - 1978-83 Front
    1978-80 Rear
    1978-80 Rear
    R47005PP 11-1/2" 2" 1992-99 Rear 1992-99 Rear
    Except FLT/FLH
    1992-99 Rear
    R47006PP 11-1/2" 2-1/4" 2000-06 Front 2000-06 Front 2000-06 Front
    R47007PP 11-1/2" 2-1/4" 2000-06 Rear 2000-06 Rear 2000-06 Rear

     

    RETAIL $181.20 DAB PRICE $150.00

BRAKE/RUSSELL_SATIN_ROTOR
RUSSELL 420 STAINLESS ROTOR SATIN FINISH
RUSSEL SATIN ROTOR
$110.95 On Sale! $100.00
Quantity:
SELECT MODEL #

PRO POLISH STAINLESS STEEL BRAKE ROTORS

Russell logo

Features

  • Highly rust-resistant 420 stainless steel
  • Features SATIN FINISH
  • Disc flatness held to one lightband (.0000116”) and finished to within one micro inch or less for zero runout
  •  

    ABOUT RUSSELL BRAKE ROTORS...

    Russell brake rotors are constructed of high-quality SVS420JZ stainless steel. They are the leading choice of custom bike builders worldwide. The unique hole pattern delivers the optimum in heat dissipation while the stainless steel is compatible with most types of brake pads, including sintered material and Kevlar®.

    SATIN FINISH 5-SHOT ROTORS

    Russel satin finish 5-shot rotors are the perfect choice when replacing the stock rotors on your motorcycle. They have a matte machine finish and are the most affordable in the Russell line of rotors.

    RETAIL $110.99 DAB PRICE $100

    PART NO.DIA.HUB DIA.XLFLFX
    R47000/ 90-37211-1/2"2"1984-99 Front1984-99 Front1984-99 Front

    R47001/  90-373

    11-1/2"2"1979-91 Rear1986-91 FLST Rear1981-91 Rear
    R4700211-1/2"2"1974-77 Front-1974-77 Front
    R47003 / 90-37410"2"1978-83 Front-1978-83 Front
    R47004/  90-37510"2"-1978-83 Front
    1978-80 Rear
    1978-80 Rear
    R47005/  90-42311-1/2"2"1992-99 Rear1992-99 Rear
    Except FLT/FLH
    1992-99 Rear
    R47006/  90-72511-1/2"2-1/4"2000-06 Front2000-06 Front2000-06 Front

    R47007/  90-727

    11-1/2"2-1/4"2000-06 Rear2000-06 Rear2000-06 Rear

pm6
PERFORMANCE MACHINE 6 Piston Differential Bore Caliper and Bracket
6 Piston Differential Bore Caliper and Bracket
$449.00 On Sale! $400.00
Quantity:
SELECT MODEL AND BRACKETS

 

 

6 Piston braking power provides the best there is for the custom builder.

Universal application: Fabrication is necessary to anchor bracket to frame. PM does not supply axle spacers or anchor assembly with kit. Anchor assembly ordered separately.

Order caliper and bracket from chart below. Bracket is a top mount, bottom anchor.

 
6 Piston Differential Bore Caliper and Bracket
Custom Applications
ALL YEARS FOR DISC BRAKE WHEELS

112X6B CALIPER & BRACKET FOR 11.5" PM DISC
Caliper Retail 
Polished0051-2910-P$449.95
Chrome0051-2910-CH$499.95
Black Anodized0051-2910-B$499.95
   
Bracket Retail
Polished0023-1526-AU-P$129.00
Chrome0023-1526-AU-CH$149.00 
Black Anodized0023-1526-AU-B$149.00 
Order 11.5" disc.Order anchor assembly and axle spacers separately.
 
 

112X6B CALIPER & BRACKET FOR 13" PM DISC
Caliper Retail 
Polished0051-2910-P$449.95
Chrome0051-2910-CH$449.95
Black Anodized0051-2910-B$449.95
   
Bracket Retail
Polished0023-1526-AU-P$129.00
Chrome0023-1526-AU-CH$149.00 
Black Anodized0023-1526-AU-B$149.00 
Order 13" disc. Order anchor assembly and axle spacers separately.
This is the ultimate rear brake system for your Custom!
 
 


 

 

 

 

Harley Davidson is a registered Trade Mark of the Harley Davidson Motor Company Inc., Milwaukee, WI.Performance Machine is not affiliated with Harley Davidson® or any other motorcycle manufacturer.

360 BRAKE
$995.00
Quantity:
SELECT OPTIONS

Caliper Assembly, Includes Caliper, Rotor Hat & 1 Arm

• The absolute cleanest looking and fastest stopping brake setup in the industry!
• The 360 Brake features one-of-a-kind stopping power with a patented system that surrounds a brake rotor on both sides, creating considerably more braking force in a much smaller space.
• In 60-0 MPH stop tests, the 360 Brake consistently stops two full motorcycle lengths sooner than the industry leading manufacturer’s brakes.
 • In consecutive 60-0 MPH hot stops, 360 Brake also has the ability to last longer before fading due to heat, meaning more control with good pad life.
• The lower center of gravitational force on the hub also helps the bike shift more braking force to the rear, making for safer and smoother stops.
• Fits 1", ¾" and numerous metric size axles.
• 360 Brake currently works ONLY WITH BILLET ALUMINUM WHEELS. A CUSTOM HUB SPACER IS REQUIRED FOR MOST WHEELS. When ordering, please have the following information ready to assist in the ordering process:
1.) The brand and size of your wheels.
2.) The bolt pattern dimension of the wheel.
3.) The axle diameter.
4.) Your choice of caliper assembly finish: polished, black or chrome.
5.) Your motorcycle model and front end size for selection of the correct anti- rotation arm.

Part TH020 Polished $995.00

Part TH021 Chrome $1095

Part TH022 Anodized, Indicate Color Choice $1095

part 360 6" polished $1295

part 360 6" chrome or powder coat $1395

for more information click on photo

360_TOP_HAT
THE 360 BRAKE 3/4" and metric Stainless Steel Top Hat Bushing
top hat 360 brake
$25.00
Quantity:
select part number
Stainless Steel Top Hat Bushing

.75" Stainless Steel Top Hat Bushing  Part TH451 By 360 Brake Natural

18mm Top Hat Bushing Part TH454 By 360 Brake Natural

19mm Top Hat Bushing Part TH455 By 360 Brake Natural

20mm Top Hat Bushing Part TH456 By 360 Brake Natural

22mm Top Hat Bushing Part TH457 By 360 Brake Natural

360_brake_slider_block
The 360 brake Slider Block (Fits Stock HD Swing arm)
TH410
$84.00 On Sale! $80.00
Quantity:

Slider Block (Fits Stock HD Swing arm)
JayBrakeBrakeSwitch
JAY BRAKE Brake Light Pressure Switch
JAY BRAKE Brake Light Pressure Switch
$99.95 On Sale! $90.00
Quantity:
select model number & color

JAY BRAKE Brake Light Pressure Switch

This brake light pressure switch is Jaybrake's reply to using the usual brakeline tee with a pressure switch attached by unsightly tabs. This brakeline fitting has everything sealed internally. This means no ugly tabs or connections and nothing for the elements to attack. This design is perfect for the custom builder who requires the common unsightly tee and switch set-up. Available with either 1/8-NPT ports or 3/8-24 threads with crush washer and AN-3 fittings.

polished Retail $99.95 Our Price $90

chrome or black Retail $109.95 Our Price $99

MODEL NUMBERS

PFM-504 3/8-24 BRAKE SWITCH

PFM-505 1/8 NPT BRAKE SWITCH SOLD WITHOUT FITTINGS

ADD TO CART TO SEE PRICES AND SHIPPING COSTS AND OPTIONS, AND MAKE SELECTIONS FROM DROP DOWN MENUS

45289
REAR MASTER CYLINDER FOR SOFTAIL
45289
$88.00 On Sale! $80.00
Quantity:

High quality reproduction of the OE part Chrome Plated Fits Softail 2000-2005 Replaces HD# 42454-99
Rear Jay Brake 6 Piston Brake Caliper For Softail 1987-1999
J_Brake Rear 87_99
$712.80 On Sale! $600.00
Quantity:

J_Brake_rear_soft_87_99 Jay Brake CNC-Machined From Billet Aluminum & Brilliant Chrome-Plated This Rear Jay Brake 6 Piston Caliper & Bracket Is Made To Fit Harley Davidson Softail 1987-1999!! Made In The U.S.A. & Includes All The Required Mounting Brackets.
BRAKE/rc_comp_caliper
R C COMPONENTS COMP CALIPER FOR HARLEY DAVIDSON
RC-COMP CALIPERS
$289.00
Quantity:
SELECT MODEL AND OPTIONS
RC COMPONENTS 4 PISTON SERIES COMP CALIPERS.

Click add to cart to see prices and calculate your shipping charges.

Custom Harley Davidson Brake Calipers and Brackets Style and function combine to produce RC Components line of custom Harley Davidson brake calipers. When used with RC's custom harley brake rotors, these calipers deliver the superior braking power you have been looking for. Each caliper is made from high quality billet aluminum and comes in a high luster chrome finish. There are two styles of calipers to choose from: 4-piston comp caliper and 4-piston direct bolt on. RC also offers several styles of brake brackets to ensure the fit of your caliper. Call 1-800-513-6838 for information on how to get your custom RC Components Harley brake calipers.

Item Polished Chrome
COMP Series Caliper - Universal - Left / Right 4 Piston - Harley Davidson $289.00 $348.00
COMP Series Caliper - for standard pulleyrotor $389.00 $448.00
COMP Series Caliper - for narrow 1 1/8" pulleyrotor $389.00 $448.00
Brake Pad replacements-standard caliper $24.00 N/A
Rebuild Kit - 4 piston caliper $15.00 N/A
BRAKE/RC_DBO_4PISTON_
R C COMPONENTS DIRECT BOLT ON 4 PISTON
RC_4_PISTON_DBO_HD
$379.00
Quantity:
SELECT MODEL AND OPTIONS

R C COMPONENTS DIRECT BOLT ON CALIPERS 4 PISTON

Custom Harley Davidson Brake Calipers and Brackets Style and function combine to produce RC Components line of custom Harley Davidson brake calipers. When used with RC's custom harley brake rotors, these calipers deliver the superior braking power you have been looking for. Each caliper is made from high quality billet aluminum and comes in a high luster chrome finish. There are two styles of calipers to choose from: 4-piston comp caliper and 4-piston direct bolt on. RC also offers several styles of brake brackets to ensure the fit of your caliper. Call 1-800-513-6838 for information on how to get your custom RC Components Harley brake calipers.

DBO 4 Piston
Item Polished Chrome
COMP Series Caliper - 4 - Piston Direct Bolt On - Left - Harley Davidson $379.00 $438.00
COMP Series Caliper - 4 - Piston Direct Bolt On - Right - Harley Davidson $379.00 $438.00
Brake Pad replacements- 4 piston direct bolt on caliper $26.00 N/A
Rebuild Kit - 4 piston caliper $15.00 N/A
BRAKE/RC_DBO_6PISTON
R C COMPONENTS 6 PISTON DIRECT BOLT ON CALIPERS FOR HARLEY DAVIDSON
$449.00
Quantity:
SELECT ITEMS

Custom Harley Davidson Brake Calipers and Brackets Style and function combine to produce RC Components line of custom Harley Davidson brake calipers. When used with RC's custom harley brake rotors, these calipers deliver the superior braking power you have been looking for. Each caliper is made from high quality billet aluminum and comes in a high luster chrome finish. There are two styles of calipers to choose from: 4-piston comp caliper and 4-piston direct bolt on. RC also offers several styles of brake brackets to ensure the fit of your caliper. Call 1-800-513-6838 for information on how to get your custom RC Components Harley brake calipers.

Item Polished Chrome
COMP Series Caliper - 6 - Piston Direct Bolt On - Left - Harley Davidson $449.00 $508.00
COMP Series Caliper - 6 - Piston Direct Bolt On - Right - Harley Davidson $449.00 $508.00
Brake Pad replacements- 6 piston direct bolt on caliper $28.00 N/A
Safe Ride advanced brake light warning system
safe ride
$139.99
Quantity:
select part and options

Add to cart to see your prices

Safety is an important part of enjoying your biking experience. Don't spoil your day….

Think Safety with our Bright Red - Flashing Warning Light!

  • Red Flashing Light illuminates when our electronic processor senses the G force when you slow down
  • This helps fellow riders avoid collisions with you
  • Avoiding Injuries, Costly Repairs and Downtime

Think Quality!

  • Water Proof Assembly
  • Not Just Water Resistant
  • Encapsulated Circuit Board
  • Water and Vibration Proof
  • Low Power Draw
  • LED lights are known to last over 100,000 hours!

Warn Others When You Are Slowing Down!!!

SYSTEM FEATURES:

Fully Waterproof and Designed to Last
The Safe Ride System can be exposed to weather. The circuitry is embedded in epoxy.

Microprocessor Controlled
The Safe Ride System is a microprocessor controlled G force sensor. As you throttle down or decelerate, the module provides power to the LED causing it to strobe for maximum attention.

Low Voltage Draw
Your battery will never know the difference. The current draw is 170 Milliamps.

High Quality Marine Grade Wire
All necessary Marine grade wiring is included.
Shock and Vibration Proof.
Low Profile Design.

Easy to Install
Detailed installation instructions are included.

THREE YEAR UNCONDITIONAL MANUFACTURER'S REPLACEMENT WARRANTY

 

 

Safe Ride Basic License Plate System
Safe Ride Basic License Plate System 
System includes Advanced Technology G-force control module, installation kit including instructions and basic license plate bracket with license plate light and red high intensity LED.

Size: 7.25 inches long, 4.25 inches high and .5 inches deep. Check license plate dimensions for your area.

Waterproof and Vibration Proof after recommended installation

$199.99

Safe Ride - Installation Kit
Safe Ride - Installation Kit 

Includes:

  • Detailed Instructions
  • Heat Shrink
  • SS Mounting screws
  • Surface cleaner
  • Silicone
  • Double sided tape
  • Zip ties
    • $16.23
Safe Ride Premium License Plate System
Safe Ride Premium License Plate System 
System includes Advanced Technology G-force control module, Chrome License Plate Frame with license plate light, Red Cat Eye LED, Installation Kit and Instructions.

Size: 7.25 inches long, 4.25 inches high and Cat Eye is 2 inches deep. Check license plate dimensions for your area.

Waterproof and Vibration Proof after recommended installation.
$209.99

Safe Ride Full Chrome License Plate System
Safe Ride Full Chrome License Plate System 

System includes Advanced Technology G-force control module, installation kit including instructions and full chrome license plate bracket with license plate light and Red LED.

Size: 7.25 inches long, 5.5 inches high and the LED is 1.5 inches deep. Check license plate dimensions for your area.

Waterproof and Vibration Proof after recommended installation
$324.98
 

Safe Ride 6 Inch Red High Intensity LED Array Only
Safe Ride 6 Inch Red High Intensity LED Array Only 
6 inch red high intensity LED array only with wire, red tube, end caps and installation instructions.

Waterproof and Vibration Proof after recommended installation

$36.87

Safe Ride License Plate System
Safe Ride License Plate System 
 

System includes Advanced Technology G-force control module, Chrome or Black License Plate Frame, 6" Red LED Array, Installation Kit and Instructions.

Size: 7.25 inches long, 4.25 inches high and .5 inches deep. Check license plate dimensions for your area.

Waterproof and Vibration Proof after recommended installation.

Choose Black/Chrome Frame

$189.99 

     

Safe Ride 6 Inch Red High Intensity LED System
Safe Ride 6 Inch Red High Intensity LED System 
System includes 6 inch red high intensity LED, Advanced Technology G-force control module and installation kit including instructions.

Waterproof and Vibration Proof after recommended installation

$179.99

Safe Ride Advanced Technology Module Only
Safe Ride Advanced Technology Module Only 
Safe Ride Advanced Technology G-force control module only. You provide LED for the look you desire. Installation instructions included. Size: 1.75 inches long, 1.25 inches high and .5 inches deep.

Waterproof and Vibration Proof after recommended installation

$139.99
 

Safe Ride Basic License Plate System
Safe Ride Basic License Plate System
$199.99
Safe Ride - Installation Kit
Safe Ride - Installation Kit
$16.23
Safe Ride Premium License Plate System
Safe Ride Premium License Plate System
$209.99
Safe Ride Full Chrome License Plate System
Safe Ride Full Chrome License Plate System
$324.98
 
Safe Ride 6 Inch Red High Intensity LED Array Only
Safe Ride 6 Inch Red High Intensity LED Array Only
$36.87
Safe Ride License Plate System
Safe Ride License Plate System
$189.99      
Safe Ride 6 Inch Red High Intensity LED System
Safe Ride 6 Inch Red High Intensity LED System
$179.99
Safe Ride Advanced Technology Module Only
Safe Ride Advanced Technology Module Only
$139.99
 

 

 

Motorcycle Brake Bleeding Tips

You decide on nice new Stainless Steel Brake Lines for your motorcycle. When they arrive you decide that it looks like you can handle the job and save a few hard earned dollars. After you lay out and install the lines you realize you have no lever or pedal pressure. You remember about bleeding brakes because you helped your friend bleed the brakes on his car, but, how do you do it on your motorcycle? You fill up the reservoir and pump and pump and nothing happens. You open the bleeder screw part and pump and pump until your forearm looks like Popeye's. You double check and triple check your lines and fittings and find no leaks. Frustrated you wonder what you were thinking in the first place when you decided it was easy.

It can be easy with the proper tools and some neat tricks. There are several inexpensive motorcyle parts like vacuum pump kits on the market that will work very well for bleeding brakes on your ride. Mity VAC, Snap On and others.

We used to have to 'pump' the brake lever / pedal up and then hold pressure and open the bleed screw to let out the trapped air. The problem on the motorcycle front brake has always been that we were pumping air down trying to bleed it from the caliper. Air likes to rise and it took hours to get it all out sometimes. The rear brakes are a little easier but some models actually have a point in the line that is higher than the caliper bleed port.

Further, we were compressing the air into the fluid making it foamy making it take longer to bleed out the air.

Now, with an inexpensive hand vacuum pump you can bleed the brakes in minutes. First remove your master cylinder cover. Make sure the reservoir is topped off. Then using the adapters in the pump attach a line from the pump to the caliper. Most kits will have a small reservoir bottle that goes between the pump and the brakes. This is to make sure you do not pull fluid into the pump and ruin it. If it does not have a reservoir you can easily make one from a paint can and some copper tubing. You want the end that goes from the pump to the reservoir with the opening at the top. The hose from the reservoir to the bleeder will stick down into the reservoir. Again, this is to keep brake fluid out of the pump.

After hooking up the motorcycle pump I usually squeeze the pump to build a good vacuum and open the bleeder. This pulls a lot of fluid right away and fills the line and caliper. Have someone top off the reservoir or check frequently to make sure you are not sucking air and defeating all your work. The line from the bleeder to the reservoir is usually clear. Observe the fluid as you continue to pump. As soon as it is clear with no sign of bubbles, pump a little more and close the bleeder.

After topping the m/c reservoir off loosely place the cover on and check for a solid lever / pedal. If you do have a good solid lever / pedal then I recommend waiting about ten minutes to let the air settle out at the top of the reservoir and I sometimes will bleed a little more out to ensure all air is out.

Since you have not compressed the air in the lines and caliper etc, this will provide solid brakes with the least amount of air in the system.

Some notes:

DOT 5 brake fluid tends to hold air in suspension. By pulling the air out rather than compressing it, you eliminate more bubbles and reduces compressibility. This will reduce the pedal loss you feel when going from low altitude to high altitude.

DOT 5 Also is a very stable silicone brake fluid. However, contaminants and particles will still contaminate the fluid. Periodic flushing is still a good idea.

Stainless steel motorcycle brake lines have very little expansion and flex. This increases the feel of the lever or pedal and changes the effort required to brake. By minimizing the amount of air in the system you make your brakes even more affective.

Delivery Policy:

Please be advised most parts are special ordered at time of your purchase. In general most items take 1-2 weeks shipping times in USA(does not include special order items). Please allow proper time for shipping and handling of product. Some times items are back ordered, this is out of our control. If it will take over four (4) weeks for us to receive from our suppliers we will contact you for options (i.e. refund or wait for delivery). Normal delivery time is 1-2 weeks on most items. Special order items may take longer (1-8 Weeks) sometimes longer. Frames may take up to 3 weeks or more, Please do not pressure us to hurry, we do our best, but if you are building a bike and need it tomorrow, don't order it today. Plan on proper order times in your build. Many times we can rush ship or drop ship, but some suppliers don't do that. MSO's will be sent a soon as we receive them, plan to wait 1-8 weeks or more for mso, we can't make them come faster then they are sent to us. Just because you have a bike show in a week does not mean we can ship parts faster, as stated before order your parts ahead of time to allow proper delivery times. Overnight shipping gets very costly.

Refund/Exchange Policy We offer a 30 Money Back or exchange Guarantee on almost every product we offer. (Most items are exchange only). Refunds do not include special order items. Items will be exchanged if received damaged for the same part only. Please call customer service at 612-296-7771, in advance to obtain an RMA number (Return Merchandise Authorization) within 30 days of purchase date. Return merchandise with RMA number to: DUMBASSBIKER.COM 1598 E. SHORE DRIVE ST.PAUL, MN 55106 NOTE: Refunds sent with no RMA number, or mailed to the call center will be returned to sender, unless you have talked to us by phone. We are not at fault if you order the wrong part, we will work with you to fix the problem but many parts are special ordered from suppliers and thus non refundable or non-returnable. Please know what you want before you order. Items must be returned in the same condition as new for refund/exchange. If you install the part and then remove it, it is no longer new, if the packaging is opened or damaged it also is no longer new. There is a 30% restocking fee on all special order parts that our suppliers will accept for returns. There is no restock fees if item is one we normally stock and returned in new condition.

Order Cancellation Policyfor Dumbassbiker.com Please submit any cancellation via email to PARTS@DUMBASSBIKER.COM , or call on our business phone at 612-296-7771. Email cancellations must contain the following: First name, last name, order number, and email address. This information must be identical to the information originally submitted on your order. Please provide contact information so that we may contact you if we have questions in regards to canceling your order. Every effort will be made to accommodate the cancellation of your order, providing your order has not been charged and/or shipped out (excludes special order items). In the event that a cancellation was submitted (via email or phone), and your order was shipped out after, we will gladly refund the complete balance charged including shipping. However, if the cancellation was documented as received after the order was shipped, we will refund the merchandise total less shipping And 20% restocking fee (special order items 30%. Special order parts are not included, Special order item's, will incur a 30% cancellation fee, most item's are ordered at time of your purchase (thus special order items), once our order is placed with our suppliers, any cancellation is subject to a 20% restocking fee. All orders must be canceled within 2 days of order placement. If not yet ordered from supplier a full refund will be issued. If already ordered and shipped from our suppliers the restocking fee will be charged

Warranty Policy on all Motorcycle parts DUMBASSBIKER sells. Shipping Costs Customer assumes all costs in shipping to us, and we assume the cost in shipping back to the customer. All replacement/repaired products are shipped UPS Ground unless a rush is requested. The cost of such a shipping upgrade is to be paid by the customer prior to shipment. Warranty Procedure We suggest you contact our parts support team first by posting a question to e-mail parts@dumbassbiker.com to determine whether the item is indeed defective before shipping. Then make an online return merchandise authorization (RMA) request. See Return Policy for more details. No phone call or email is necessary! 30-Day Warranty All products (unless specifically stated otherwise), carry an implied, industry-standard 90-Day warranty against defects due to manufacturing or failure. Warranty does not include any use of the product that does not fall into the designed use of the product as intended by the manufacturer. Nor does it cover misuse or abuse. Does not include electronic or electric items or parts. 60 day Warranty All parts (except refurbished items) come with a warranty against manufacturer defect or failure for a period of 60 days from the date of purchase. This warranty covers replacement or repair of the product, which is determined by availability, or vendor, and the time of purchase. Replacement is often used within 30 days after purchase with the same product or like product when direct replacement is unavailable. Repair is often necessary for items purchased more than 30 days prior. Does not cover misuse or abuse or mis- installation . does not include electric parts or electronic devices. Manufacturer Warranty Manufacturers sometimes offer additional warranty for the following products: (…engines, transmissions primaries, wheels, tires, controls, etc). Customers should contact the manufacturer after warranty expires. Includes electrical components i.e. batteries, starters. Manufacturer warranty overrides dealer warranty in all cases.

A word about Dumbasbiker.com. We are parts dealers, we are not trained mechanics or bike builders, while we work on our own bikes and friends bikes, we don't claim to know everything about every product on the market. We have access to over 1,000,000 parts, Please understand you as the builder, installer, or mechanic, should do some research on your product purchase to assure you get what you need ( a good resource for all to have is the Harley service manual or how to books, most information carries over to aftermarket parts as they are all biased on Harley stock parts, fluid levels and specs). Goggle search is an excellent resource to find manufactures contact information and tech support phone numbers. We list everything we know about products in our listings, these are as spec 'd by parts manufacture. Our policy is to save you money on your purchase, and make life simple by buying online . If we have to take your order over the phone because you can't or don't want to do it on line there is a $10 customer service fee added to purchase price(this is only applied to phone purchases) It cost money to staff phone order lines, again less staff saves you money. We have a very secure web site for your safety, we do not save or keep credit card information on file, nor do we even see it when purchased on our web site. Again the best way to contact us is by e-mail it is almost impossible to quote prices on the phone in a short time has we have many suppliers for our parts, our goal is to get you the best price on a quoted part, that takes time and research. We will respond to e-mail ASAP. We can also send you order form by e-mail or fax. When you fill out the order form if you don't want to send us your credit card on the order form we will call you back for that number. Our phones are very busy all the time, so e-mail is better way to contact us first. While we do stock some items, do to the vast number of parts on the market place we can't stock them all. Most items ship in 2-7 days, although many special order items may take up to 10 weeks (i.e. frames, engines, etc) remember suppliers stocks change by the day and even by the second, as well time of year, may deplete suppliers stocks as well (spring is the worst) please order your parts well ahead to be assured of timely delivery and to meet your dead lines. Prices are as listed on the web site, we don't barter, we feel we offer fair prices for our parts. Warranties are provides by manufacturers. We will work to solve a problem of one arises.

What is a special order item? One we don't stock normally, if your local shop does not stock it we most likely don't either. Do to the large amount of part for motorcycles it is hard to stock everything, our suppliers are 1-3 day shipping to us on most items. We send on to you as soon as we receive an item.

We will do everything in our power to work with you on cancellations and returns, so there will be no charge backs to you. We sell at discounts to save you money, be sure to order correctly. If we charged retail prices we would have more room to relax our policy, but do to deep discounts there is not much overhead to eat mistakes you make with an order. Please e-mail us with questions or contact the manufacture for questions on parts and fitments. The more you know about your bike the easier it is for us to help you. Remember a custom is a one of a kind motorcycle, keep that in mind when asking questions that we can't answer.

Dumbassbiker.com is not responsible or liable for misuse or installation of any product we sell. You the customer, are responsible for safe use and installation of any product you purchase and install. Dumbassbiker.com makes no claims as to fitment and safety of the parts it sells, the manufacture is responsible for all fitment claims, and the safety of their products. We suggest a qualified mechanic install all custom parts.

Gift Certificates
Send to a Friend!

Dumbassbiker.com home page